Recommended Tonneacu Cover And Ladder Rack Combo For A 2023 Toyota Tundra Limited

Question

Question:

What can I use on a 2023 Toyota Tundra Limited?

asked by: Cait

0

Expert Reply:

Since you're looking at the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack for Tonneau Cover # Y01151-5855 I assume you're looking for a compatible tonneau cover to go along with this for your 2023 Toyota Tundra. If that's the case then you'll need to have the Deck Rail System in the bed in order to install the RetraxPRO XR Hard Tonneau Cover # RTX99XR (5.5' bed) or # RTX49XR (6.5' bed) for the OverHaul to mount into.

If you don't have the deck rail system then you would need to switch to a different combination like the BAK Revolver X4s Hard Tonneau Cover # BAK27AV and Adarac Pro Series Custom Truck Bed Ladder Rack # A52AG. This would only work if you have stake pockets in the bedrails to mount the ladder rack into.

expert reply by: Kevin C

0

Answer 1

That hitch does stick out pretty far on your 2021 Nissan Rogue! I can certainly understand wanting something a bit more recessed. We have the Curt hitch #C24HR which is much more recessed like you can see in the picture I attached. I could be wrong…

view full answer...

Answer 2

The RetraxPRO XR Hard Tonneau Cover w/ Trax Rails - Retractable - Aluminum - Matte #RTT-80384 has a canister that is 13-3/4 inches wide and sits 11-5/8 inches deep from the top of the bed rail. The RetraxPro and the Pace Edwards Jackrabbit…

view full answer...

Answer 3

The TruXedo Sentry CT #TX74NV (with deck rail system) or #TX44NV (without deck rail system) and BAK Revolver X4s Hard Tonneau Cover #BAK27AV have a very similar vinyl top, which would both hold up the same against abrasions. These vinyl tops…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 6

Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only tonneau…

view full answer...

Answer 7

Hi Jeff; thanks for the question and sturdy is definitely a good word for the etrailer tonneau that fits your 2022 Ram 1500 with a 5-1/2 foot bed, the etrailer Hard Tonneau Cover #e35DR. It's made of a fiberglass-reinforced plastic which is a…

view full answer...

Answer 8

Usually ladder racks use the inside edge of the top of the bed site to attach to the vehicle, but luckily there are exceptions to that. The Thule TracRac SR is typically compatible with tonneau covers that mount to the inside edges of the truck bed.…

view full answer...

Answer 9

I have a solution for you Travis as Pace Edwards does not offer a contractor rack for your 2023 GMC Sierra 1500. Instead you can use the Pace Edwards Full-Metal JackRabbit Retractable Hard Tonneau Cover #311-M-FMCA28A59 with the Thule TracRac SR…

view full answer...

Answer 10

Hi Ruben; thanks for the question, and while there is one rack for your 2023 Ford F-150 with a 6-1/2' bed compatible with the Pace Edwards UltraGroove Metal Retractable Hard Tonneau Cover #PE66UV, it does not have sides, and is part #TX84NV.…

view full answer...

Answer 11

Hey Brian, the Pace Edwards Full Metal JackRabbit part #PE36CV that you referernced has a 300 lb weight capacity when spread evenly on the cover. The Retrax Pro XR on other hand has a 500 lb capacity.

view full answer...

Answer 12

Yakima's Skyline towers part #Y53TR can fit the tracks of the Retrax XR that you have with the landing pad 1 part #Y00221 but there isn't a way with the Baseline towers. Your Yakima Corebar or Jetstream bars will work with the Skyline towers…

view full answer...