TorkLift StableLoad Suspension Kit for a 2023 Chevy Silverado 3500 Short Bed Diesel

Question

Question:

I have a 2023 Silverado 3500 CC SB single Diesel. Would I use PN# TLA7200 or TL7202 for Upper Torklifts? The information provided is confusing. Thx.

asked by: Bob

0

Expert Reply:

The correct TorkLift StableLoad Suspension Upgrade for the Upper Overload Springs on your 2023 Chevy Silverado 3500 short bed diesel is part # TLA7200. The other part you mentioned is for earlier years of the same truck.

I confirmed this with TorkLift directly for you!

expert reply by: Jon G

0

Answer 1

Tork Lift Stable Load #TLA7200 is designed for certain Ford and Dodge trucks but will not fit the 2016 GMC Sierra 3500 Denali. For your truck you would need #TLA7202. We had a customer install them on a 2016 3500 like yours and he had no problems.…

view full answer...

Answer 2

From the looks of the photo you have attached it appears you have a lower overload spring, not an upper overload spring that is required for the TorkLift StableLoad Suspension Upgrade for Upper Overload Springs part #TLA7200 to work. This kit will…

view full answer...

Answer 3

I may have a solution for you but this will involve you checking fitment on your 2003 Chevrolet Silverado 3500. After speaking to TorkLift they mentioned not seeing upper overload springs in their testing and fitment for your Silverado. They did…

view full answer...

Answer 4

The Timbren Suspension Enhancement System #TFRTT350J would be my recommendation. These are designed to improve handling and safety by becoming more rigid with weight added. This will help increase stability, reduce the sag you mentioned, and each…

view full answer...

Answer 5

Thank you for the pictures of your overload springs. Since you actually have upper overload springs and not lower overload springs you will instead need the TorkLift StableLoad Suspension Upgrade for Upper Overload Springs #TLA7202. These will mount…

view full answer...

Answer 6

I am happy to report that the TorkLift StableLoad Suspension Upgrade #TLA7200 does not require drilling on your 2022 Ford F-250 super duty. I went ahead and attached a photo of from the instructional manual for you to check out. It is important to…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 9

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 10

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

The 7290 that you see is a casting number. It is found on AL-KO hubs that fit #99 spindles. I found that the bearings used are #28580 which would be the inner bearing and #25580 which would be the outer bearing. For the seal use #91030.

view full answer...

TorkLift StableLoad Suspension Kit for a 2023 Chevy Silverado 3500 Short Bed Diesel

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching