Does The Surco Extrerior RV Ladder Attach To The Top Of An RV And Include Mounting Hardware

Question

Question:

Thor Four Winds 28Z. 2017. Does the ladder attach to the top of the roof? My existing broken one currently it. Does this unit require that attachment and is the hardware for that included?

asked by: Randy B

0

Expert Reply:

The Surco Exterior RV Ladder # SP502L does attach to the roof of the RV and comes with mounting hardware. It's a universal fit though so it will likely not match up with your current mounting points and would require you to ensure you actually mounting into a stud or something else solid. You'll also need to pick up some sealant # 344270341437-1 to cover the mounting hardware with to prevent water from leaking into the motorhome.

expert reply by: Kevin C

0

Answer 1

Thank you for the drawing. It was helpful to see the dimensions you are looking at. We only have one ladder that is a universal fit application, so it will fit your RV but it will not fit in a custom way. It will absolutely be able to give you a…

view full answer...

Answer 2

I attached a picture that shows what the mounting brackets of the RV Ladder part #SP501L look like. Outside to outside of the rails on the RV ladder part #SP501L measures 13 inches. Typically bolts and nuts are used to hold the aluminum flanges…

view full answer...

Answer 3

Absolutely. You can manually apply the trailer brakes independently of the vehicle brakes by depressing the control knob, as shown in the provided diagram and as mentioned on page 5 of the instructions I've linked for you. I've linked…

view full answer...

Answer 4

Yes! I am happy to report that your 2014 Nissan Frontier can use the Furrion Vision S #FOS05TASF without the need for an adapter or additional wiring when towing your 2022 Gulf Stream Vista Cruiser 19RBS.

view full answer...

Answer 5

We do offer a range of RV exterior ladders that are general-purpose replacements that will work on many trailers and RVs, but none of these is a custom-fit item intended as an exact OEM replacement for any particular unit. RV makers may change ladder…

view full answer...

Answer 6

I went out to our warehouse to get these measurements for the Replacement Bottom Ladder Section #SU77VR. These have an overall length of 36" with the two 7/8" inserts spaced 11" on center. The 7/8" is the outer diameter of the…

view full answer...

Answer 7

We do have replacement support pegs available for RV exterior ladders, which I have linked for you to look through. In order to choose a compatible replacement, you will want to measure the length of your existing units. For 5 inch support pegs, we…

view full answer...

Answer 8

If your original ladder was 84-1/4 inches long, the Surco Universal Exterior RV Ladder #SP502L would work well for you. I don't have access to any reference material that would tell me which ladder would have originally been used on your 1999…

view full answer...

Answer 9

Each of the motors of the Happijac Electric Truck Camper Jack System #LC736515-ELKIT is protected with a 25 amp fuse. So it can pull right up to 25 amps.

view full answer...

Answer 10

Yes. You can replace the Progressive Dynamics PD4590K18NS2 with the Replacement Converter Section for Progressive Dynamics 4500 Series RV Power Control Center - 90 Amp #PD4590CSV without any issues. Both are 90 amp converters from the same Series and…

view full answer...

Answer 11

The Valterra HydroFlush RV Black Tank Flush System #VAL42RB is recommended to be installed on the top of the tank so it's out of the way of everything and isn't a point that solids could get caught on or in the event that the backflow valve…

view full answer...