Will 10" x 2-1/4" Brake Assemblies Fit 3k Axle on 2013 Jayco Swift SLX 184BH
Question:
I have a 2013 Jayco Swift Slx 184bh The trailer has 1 1/2inch brake shoes with 3k axle. Will I be able to bolt on an upgraded 2 1/4inch brake assembly.
asked by: Eric B
Expert Reply:
The brakes you have now and 10" x 2-1/4" brake assemblies like the # AKEBRK-35-SA share the same bolt pattern. So technically yes, you could bolt it onto the brake flange on the axle. However, your hub and drum assembly is going to have the same 10" x 1-1/2" dimensions as your brakes so the larger brake assembly won't be compatible.
Your 3k axle won't have bearings that match a 3,500 lb axle so you can't switch to a hub and drum like the # AKHD-545-35-EZ-K you were looking at. Unless you want to replace the entire axle, it would be best to stick with the same size replacement brakes and get the Dexter # K23-472-473-00.
Products Referenced in This Question
etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- etrailer
more information >
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Dexter Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3,000 lbs
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Manual Adjust
- 10 x 1-1/2 Inch Drum
- 3000 lbs Axle
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Product Page this Question was Asked From
Bearing Kit, L44649 Inner/Outer Bearings, 10-9 Seal
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649
- Race L44610
- 2200 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 5-1/2 - Pre-Greased
- Search Results: dexter 3000 lb axle
- Q&A: Replacement Trailer Brakes and Hubs for 2007 Jayco Jayfeather 25z
- Q&A: Replacement Brake Assemblies and Hub/Drums for 2002 Jayco Qwest Trailer
- Q&A: Determining Replacement Bearings For Hub On 1999 Jayco Eagle 12 SO Pop-up Camper
- Q&A: Correct Replacement Hub/Drum for 1994 Haulmark Elite 24' Trailer
- Q&A: Where is the Width of # AKHD-545-35-EZ-K Measured at
- Q&A: Hub & Drum For 2014 Jayco Jay Flight Swift SLX With 3,500 lb Axle & 5 on 4-1/2 Bolt Pattern
- Q&A: Picking Out Replacement Hub for 1996 Elite Ski Boat Trailer
- Shop: Dexter Trailer Idler Hub for 6,000-lb Axles - 6 on 5-1/2" - Galvanized
- Shop: Dexter Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3,000 lbs
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Search Results: 5 on 4
- Search Results: 5 on 41 2
- Search Results: 5 on 41 2
- Search Results: 5 on 4 12 hub
- Shop: etrailer Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3,500 lbs
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Pre-Greased
- Video: Review of etrailer Trailer Hubs and Drums - Pre Greased Hub with Integrated Drum - AKHD-555-35-K
- Search Results: 25580
- Article: Most Popular Wheel Bearings
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Search Results: trailer brakes
- Video: etrailer Electric Trailer Brake Kit Installation
- Shop: Trailer Wiring
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Shop: Brake Controller
- Video: Dexter Electric Trailer Brake Kit Installation 23-26
on Trailer Bearings Races Seals Caps
