Offset Gooseneck For 2023 Ford F-250 With Factory Gooseneck/5th Wheel Pucks

Question

Question:

Have a 2023 Ford F250 Super duty with factory installed gooseneck/fifth wheel set up. Will this extension ball work in my truck? 19308

asked by: Marty

0

Expert Reply:

We do have an offset gooseneck that will fit your 2023 Ford F-250 Super Duty, but the part you mentioned is not a fit for your truck. Instead, what you will need is the following:

- Gen-Y Hitch Gooseneck Trailer Hitch for Ford OEM Puck Systems - 5" Offset # GY43XR

The # GY43XR actually fits in the puck system of your truck and provides the same 5" offset as the part you asked about.

expert reply by: Kyle S

0

Answer 1

Yes, it will! The 5" Offset Gen-Y Hitch Gooseneck Trailer Hitch item #GY43XR is specially designed to work with the Ford factory puck system. It will push the connection point for the gooseball and your cattle trailer back 5"…

view full answer...

Answer 2

Yes, since the Gen-Y Hitch Gooseneck Trailer Hitch for Ford OEM Puck Systems #GY43XR has a 5" offset it will place the pin weight 2-1/2" behind the current center of your gooseneck hitch ball. This does means the front axle will be…

view full answer...

Answer 3

The correct Gen-Y Hitch Gooseneck Trailer Hitch for OEM Puck Systems for a 2022 Chevrolet Silverado 2500 is part #GY73XR. This adapter works with both short and long bed models. That said, it's really designed for short bed models since long…

view full answer...

Answer 4

Yes, the Gen-Y offset ball adapter part #GY43XR that fits the Ford puck system of your truck can be used with the Reese Goosebox without voiding any warranties.

view full answer...

Answer 5

The receiver or bottom portion on the Gooseneck Hitch Ball with 2-5/16 inch Diameter and 5 inch Offset, part #19308 is round. This Gooseneck ball is model specific, it will only work with the #9460, #9461, #9462, #9463, #9464, #9470, #9471 and…

view full answer...

Answer 6

With a 2022 F350 short bed, hitting the top of the bed rails should not be an issue with most campers. Turning clearance however, will certainly be a factor. That is one advantage of the Andersen Ultimate hitch #AM3200, as it provides a 9"…

view full answer...

Answer 7

Thank you for all of the great info! While you technically could have enough room to make turns with the B&W Companion #BWRVK3370 and the BAKFlip MX4 Hard Tonneau Cover #BAK48330, from what I could find out I think you're only going to have a…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

There are a couple of options that'll work great with your Lippert Turning Point Pin Box, however one hitch stands out to me more than others. Take a look at the: -Curt E16 5th Wheel Trailer Hitch - Slide Bar Jaw - 16,000 lbs #C16115 This 5th…

view full answer...

Answer 10

The best way to prevent any clearance issues with your 2022 KZ Durango Gold G356RLQ and your 2020 Chevrolet Silverado 2500 with 6-1/2' bed and factory puck system is by using the Demco Autoslide 5th Wheel Hitch #DM79GV. This hitch slides back and…

view full answer...

Answer 11

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Answer 12

If you take a look at the linked diagram you can see the minimum recommended clearance distances between truck and trailer for 5th wheel towing. It is recommended to have at least 5-inches from the top of the bed rails to the bottom of the trailer…

view full answer...

Offset Gooseneck For 2023 Ford F-250 With Factory Gooseneck/5th Wheel Pucks

Product Page this Question was Asked From

Continue Researching