Replacement 12" x 2" Brakes For Trailer With Mobile Home Axles
Question:
I need shoes and the arm and springs and the clip as shown in this picture. 12 inch by 2 inch.
asked by: Chuck C
Expert Reply:
With you having mobile home axles only designed for one time use you would have to cut off your brake assemblies since the backing plate is welded to the axle. Then you will be able to weld on a Brake Flange # 4-44-1 to each of your hubs. This will allow you to bolt on the Brake Kit # AKEBRK-6 for each of your axles. Then you will be able to get Replacement Shoes # AKBRKR-S-12 in the future.
Depending on the condition of your axle you may be better off replacing the entire axle. If this is something that is needed we do have several different axle like the # e75SR which includes new hubs and brakes. I would need to know the measurements of your axle from hub face to hub face as well as its weight capacity and spring center to spring center lengths to verify if we have a axle you can bolt in place.
Products Referenced in This Question
Replacement Shoe and Lining Kit for 12" Manual-Adjust Brake Assembly - 5,200 lbs to 7,000 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- LH
- RH
- 5200 - 7000 lbs
- Brake Shoes
- 12 x 2 Inch
- etrailer
more information >
etrailer Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 5,200 lbs to 7,000 lbs
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Manual Adjust
- 12 x 2 Inch Drum
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- etrailer
more information >
Trailer Axle w/ Electric Brakes - Easy Grease - 6 on 5-1/2 Bolt Pattern - 89" Long - 5,200 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- Electric Brakes
- 5200 lbs
- 6 on 5-1/2 Inch
- 74 Inch Long
- 89 Inch Long
- No Drop or Lift
- etrailer
more information >
Product Page this Question was Asked From
Brake Mounting Flange for 3" Round Axle
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- Electric Drum Brakes
- Hydraulic Drum Brakes
- Brake Mounting Flange
- 12 Inch
- 3 Inch Diameter Axle
- Redline
more information >
Continue Researching
- Shop: Trailer Axle w/ Electric Brakes - Easy Grease - 6 on 5-1/2 Bolt Pattern - 89" Long - 5,200 lbs
- Video: Review of Dexter Axle Trailer Brakes - 12 inch Electric Drum Brake Kit - 23-105-106
- Video: Redline Trailer Brakes 4-44-1 Review
- Video: etrailer Hydraulic Brake Kit Installation
- Shop: Dexter Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 6,000 lbs
- Q&A: Is a Gap Between a Trailer Brake Backing Plate and Drum Normal
- Q&A: Dimensions for a Brake Mounting Flange for a 3 Round Axle
- Q&A: Will 5 Hole Brake Backing Plate fit Mobile Home Axle
- Q&A: Recommended Brake Mounting Flange To Welded On Brake Assemblies
- Q&A: Where to Mount the Brake Mounting Flange 4-44-1
- Shop: Brake Mounting Flange for 3" Round Axle
- Video: Review of Lippert Electric Drum Brakes - LC46WD
- Shop: etrailer Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 5,200 lbs to 7,000 lbs
- Shop: etrailer Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3,500 lbs
- Shop: Grease Seal - Double Lip - 2.125" ID - 3.376" OD - GS-2125DL
- Shop: Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Article: How to Replace Trailer Leaf Springs in 5 Steps
- Article: Slipper Spring Trailer Suspension System Review
- Q&A: How To Upgrade to 6 Lug Hubs On Mobile Home Axle with 1.750" and 1.250" Bearings
- Q&A: What is Most Common Leaf Spring Length for 3,500 and 5,200 lb Trailer Axles
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Search Results: 25580
- Search Results: equalizer
- Article: Most Popular Wheel Bearings
- Shop: Trailer Wiring
- Article: Trailer Tire Sizing
- Shop: Brake Controller
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Search Results: 10~36