Dimensions for a Brake Mounting Flange for a 3 Round Axle
Question:
If this mounting flange is for a 3 axle, why does the description state 2.75 ID? My 7K axles are 3 OD. I need brake assemblies and mounting flanges to weld to existing axle.
asked by: Dale
0
Expert Reply:
The measurements of the Brake Mounting Flange for a 3 inch Round Axle, part # 4-44-1, are correct, in that the inner diameter of the flange is 2-3/4 inches. This is because the flange will be mounted to the spindle, not the axle. You will need to check the Outside Diameter of your spindle, as this will mount on the spindle.
expert reply by:
Andi
0
Product Page this Question was Asked From
Brake Mounting Flange for 3" Round Axle
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- Electric Drum Brakes
- Hydraulic Drum Brakes
- Brake Mounting Flange
- 12 Inch
- 3 Inch Diameter Axle
- Redline
more information >
Continue Researching
- Shop: Brake Mounting Flange for 3" Round Axle
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Search Results: brake mounting flange
- Shop: etrailer Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 5,200 lbs to 7,000 lbs
- Video: Redline Trailer Brakes 4-44-1 Review
- Shop: Trailer Axle Beam with Easy Grease Spindles - 94" Long - 7,000 lbs
- Shop: Dexter Nev-R-Adjust Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 7K
- Shop: Trailer Brake Mounting Flange for 3-1/2" Axles, 12-1/4" Brake Assemblies
- Q&A: Is there a Brake Mounting Flange that Has a 3 Inch Diameter Center Hole
- Q&A: Where to Mount the Brake Mounting Flange 4-44-1
- Shop: Dexter Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 6,000 lbs
- Search Results: trailer brake mounting flange
- Search Results: crossbars
- Search Results: crossmember~back exhaust
- Search Results: 42656
- Search Results: brake flange
- Search Results: enclosed trailer skin
- Video: etrailer Hydraulic Brake Kit Installation
- Video: Review of Dexter Axle Trailer Brakes - 12 inch Electric Drum Brake Kit - 23-105-106
- Q&A: Is a Gap Between a Trailer Brake Backing Plate and Drum Normal
- Article: How to Replace Trailer Leaf Springs in 5 Steps
- Article: Most Popular Wheel Bearings
- Q&A: Bolt Pattern of 5 Bolt Brake Mounting Flange for Trailer Brakes
- Q&A: Will 5 Hole Brake Backing Plate fit Mobile Home Axle
- Q&A: Replacement Brake Assemblies that Use 5 Hole Round Brake Mounting Flange
- Q&A: Brake Flange Needed to Install 12 Inch Brake Assemblies With 5 Bolt Mounting Holes
- Video: Review of etrailer by AxleTek Trailer Axles - 7,000 lbs 94 Inch Easy Grease Axle - e93GR
- Video: Review of Dexter Axle Trailer Axles - Leaf Spring Suspension - 8327864
- Video: Review of Lippert Electric Drum Brakes - LC46WD
- Article: How to Measure a Trailer Axle