Are There Any Pictures/Diagrams Of The Detail K2 Mounting Brackets K281235

Question

Question:

Hi I was just wondering are there any pictures to see the mounting bracket to reference to Custom Mounting Brackets for Detail K2 Snowplows - Premium Item # K281235 I have a snow plow just like to see how this would fit to my 2012 ford escape

asked by: Cody P

0

Expert Reply:

I was able to find a drawing of the # K281235 on the detail K2 website which I have included below. There is very little info out there on this kit. We have not installed one here, nor have we had a chance to get one down to photo and take our own pictures. These kits have not been available for quite some time. The last time we sold one was in 2017.

expert reply by: Jesse M

0

K281235
(click to enlarge)

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 4

To replace your NOK AD2527E seal you can use #168233. It has an inner diameter of 1.688 inches and an outer diameter of 2.332 inches. Based on what I could find on the NOK AD2527E the inner diameter is the same and the outer diameter is 2.328 inches.…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 7

To answer your question, yes, the mounting kit #K281235 will fit your 2012 Ford Escape 2WD. No additional modification or steps would be required. That said, it is generally not recommended to plow with a 2WD vehicle. In light snow, say 6" or…

view full answer...

Are There Any Pictures/Diagrams Of The Detail K2 Mounting Brackets K281235

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching