Availability of 15 inch Mod Trailer Wheel that is 5 inches Wide with 5 Bolt Pattern

Question

Question:

Hi. I am looking for a modular trailer wheel.15x5 5bolt pattern.Back side of wheel is 2 9/16 maybe 2 5/8 from floor to back side of the flange.Flip over and front side is 3 1/8 from floor to back side of flange.

asked by: Vernon M

0

Expert Reply:

For a black mod wheel that is 15 inch in diameter and 5 inches wide and a bolt pattern of 5 on 4-1/2 inch you'd want the Vesper Steel Mod wheel part # MX34FR.

expert reply by: Jameson C

0

Answer 1

Backspacing and offset are not the same thing. Offset is how much the mounting surface of the wheel is off of center. Backspacing is the distance from the mounting surface to the outer edge of the wheel closest to the trailer. So they are similar but…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 4

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 5

To determine the size of the hub assembly you need to purchase you have to determine which bearings are in the old assembly. If the old assembly has L44649 inner bearings, you would use the hub you chose #8-258-5UC1. If the inner bearings are marked…

view full answer...

Answer 6

A BT8 spindle would have a diameter of .99 of an inch where the bearings would both install and would have a diameter of 1.24 where the great seal would ride. That would require a hub part #AKIHUB-440-2-1K for an idler hub. A BTR spindle would have…

view full answer...

Answer 7

The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this up for…

view full answer...

Answer 8

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 9

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 10

Good morning, Cliff. As of today (3/27/24) we are expecting the #KE33JR tire/wheel combo to be in stock in about 2 weeks. Hopefully this means we can take our own pictures and put them on the site within maybe about 3-4 weeks from now. What I can…

view full answer...

Answer 11

Yes, the Kenda Karrier S-Trail ST145/R12 Radial Trailer Tire #AM10140 referenced in your question will fit the same 12 inch wheel with a 4 inch width that your existing 4.80-12 size tires are mounted to. Just note that the ST145/R12 tire will be…

view full answer...

Answer 12

Hey Medic, so the Kenda ST235/75R15 Radial Off-Road Trailer Tire #KE68JR was designed for off-road traction but it is going to do really well in the wet and snowy conditions. Based on what you are looking for these are going to work well.

view full answer...

Availability of 15 inch Mod Trailer Wheel that is 5 inches Wide with 5 Bolt Pattern

Product Page this Question was Asked From

Continue Researching