Correct Trailer Wiring Harness For 2023 Tesla Model 3

Question

Question:

Hello, Confirming part #119250KIT is the correct trailer wiring harness for a 2023 Tesla Model 3 Long Range. Im only planning on using it for the light bar on my bicycle rack brake and plate lights

asked by: Kevin B

1

Helpful Expert Reply:

Yep, you got it right. I can verify for you the correct trailer wiring harness for your 2023 Tesla Model 3 is the one you mentioned:

- ZCI Circuit Protected Vehicle Wiring Harness # 119250KIT

expert reply by: Kyle S

1

Answer 1

The kit that you ordered #391TES317T comes with the stealth hitch towing kit #391CONVB7. This is a hardwire kit just as shown and stated on the part page. The wiring kit is made specifically for the Tesla Model 3 2017-2023 so it will work nicely for…

view full answer...

Answer 2

We offer two different hitch fits from Stealth Hitch for a 2021 Tesla Model 3. If you'll be using the hitch as an attachment point for a hitch mounted accessory such as a bike rack or cargo carrier only, you'd want to use the #391TES317 which…

view full answer...

Answer 3

The difference in weight between the EcoHitch #306-X7373 and Stealth Hitch #391TES317 is going to be negligible, as both weigh around 45-lbs. If you're planning on towing and go the Stealth Hitch route, you'll need the #391TES317T instead of…

view full answer...

Answer 4

Yes, the Stealth Hitches Hidden Rack Receiver is a confirmed fit for the 2022 Tesla Model 3. Order the same #391TES317 (for accessories only) or #391TES317T (for towing and accessories)

view full answer...

Answer 5

It is possible to connect a brake controller to your 2020 Tesla Model 3. Since Tesla doesn't recommend towing with the Model 3 your best option is the Curt Echo #C51180 because it only need the basic lighting functions and 12V power for…

view full answer...

Answer 6

It depends on what trailer you'd consider to be "most" trailers, but with a Tesla you're going to be pretty limited so I'll assume it's nothing with brakes. So with that being said, we have the ZCI Circuit Protected Vehicle…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 10

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 11

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 12

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Correct Trailer Wiring Harness For 2023 Tesla Model 3

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching