Replacing A Shelby 5352 Winch

Question

Question:

I am looking for replacement fiber discs for the friction brake on a Shelby 5352 boat winch. I found a manual that says they are part 0846-06. Can you supply this part? Thanks

asked by: Scott K

0

Expert Reply:

I do have a potential solution for you, but Shelby is out of business so we cannot provide replacement parts for your winch. We would have to replace the whole winch.

The winch I highly recommend to replace your Shelby 5352 winch is the Dutton-Lainson Hand Winch # DL14927. This winch has the same 1,500 lb capacity as the Shelby 5352, an automatic brake, and is designed for use with a boat lift.

expert reply by: Jesse M

0

Answer 1

Because I don't know how your specific trailer is designed with the scissor lift I don't know if the Dutton-Lainson Hand Winch w/ Automatic Brake - TUFFPLATE Finish - 2,500 lbs #DL15721 will be large enough capacity to safely lift…

view full answer...

Answer 2

There is a winch I recommend replacing your Shelby 5352 with the best option being the Dutton-Lainson Hand Winch with Automatic Brake #DL14927. This is a 1,500 lb capacity winch (you mentioned 2,500 lbs for capacity, though a higher capacity does…

view full answer...

Answer 3

I looked up your trailer jack info and it was a 1,600 lb hand winch that hasn't been made in quite some time. Most refer to it as a "vintage" hand winch. Sounds like you got a lot of life out of but there's nothing we offer beyond…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

I do have a potential solution for you, but Shelby is out of business so we cannot provide replacement parts for your winch. We would have to replace the whole winch. The winch I highly recommend to replace your Shelby 5352 winch is the…

view full answer...

Answer 8

For your 2021 Chevrolet Blazer you're going to need to start with a base plate kit. Since there aren't any Blue Ox base plates I'd recommend going with the Roadmaster Direct-Connect Base Plate Kit #RM-523204-5. These are just as good as…

view full answer...

Answer 9

On Dexter 12" Nev-R-Adjust Electric Brake Assembly #23-458 the shoe pad thickness is 3/16 of an inch. Dexter says that you should replace the shoes if the material gets down to 1/16 of an inch thick or less.

view full answer...

Replacing A Shelby 5352 Winch

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching