Options for Lift Kit on 2016 Lance 2185
Question:
Hello, Can you direct me to trailer lift kits that will work on my 2016 Lance 2185 25 pull behind travel trailer. I would like to see 2 lift kits, and possibly others. Thank you
asked by: John J
Expert Reply:
I have two options for you to lift your 2016 Lance 2185. The first is to use an axle flip kit # K71-384-00. This is designed for axles with a 2-3/8" diameter. Based on your GVWR that is likely what you have but you will need to verify to be sure it fits. The flip kit will move your leaf springs to the top of the axle. This will raise your trailer the diameter of the axle plus the height of the leaf spring stack. One kit will be required for each axle.
The other option is to use the Correct Track Trailer Alignment and Lift Kit # RR23QX. This kit will raise the height of your trailer by 1-1/4" or 2-1/4". It will also keep the axles aligned on your trailer.
I have attached an installation video below for your reference.
Products Referenced in This Question
Correct Track Trailer Alignment and Lift Kit - Tandem Axle
- Trailer Suspension Parts
- Alignment and Lift Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Slipper Springs - 2 Inch
- Tandem Axle
- RV Ride Control
more information >
Product Page this Question was Asked From
Dexter Trailer Springs Over-Under Conversion Kit
- Trailer Suspension Parts
- Alignment and Lift Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Round Axle - 2-3/8 Inch
- Single Axle
- Dexter
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: How to Raise Your Travel Trailer Height
- Article: Trailer Tire Sizing
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Slipper Spring Trailer Suspension System Review
- Article: Double-Eye Trailer Suspension System Review
- Q&A: How to Raise a 5th Wheel Trailer so it Rides Level
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: Trailer Wiring Diagrams
- Q&A: Dimensions for the MORryde ALLTREK 4000 Suspension Kit
- Q&A: Double Eye Leaf Springs For Tandem Axle Trailer With 10,500LB Rating and 24" Length on Spring
- Q&A: Does MORryde ALLTREK 4000 Cushioned Equalizer Sit Taller to Offset for Additiona Suspension Movement
- Q&A: Can 3,500 lb Axle Trailer Leaf Spring 25-1/4 inch get Replaced with 5k Rated Spring
- Q&A: What Leaf Spring Width SHould be Used with Dexter Over Under Kit # K71-384-00
- Q&A: Would Dexter 3,500 lb Axle Made in 1999 Use Same Hubs as Current