Recommended Towing Mirrors For A 2016 Ford Edge

Question

Question:

Looking for mirror extension for 2016 Ford edge to tow sm trailer

asked by: Sandra C

0

Expert Reply:

Awesome! We have just the thing. I recommend the CIPA dual lens # 11953-2. This is a universal mirror that will strap on to the existing mirror. I really like the dual lens mirrors because they give you more adjustability and allow you to fine-tune your view. They are very easy to install, and you will have to problem adjusting them to see behind your small trailer.

I have linked our install video below if you want to take a look.

expert reply by: Jesse M

0

Answer 1

Both of these mirrors are designed to be a universal fit with a manually adjusting mirror, but the K-Source #KS69ZR has a rubber strap that is not ratcheting. The #KS3891 has a ratcheting strap with a different strap that allows you to get a bit…

view full answer...

Answer 2

For a great economical towing mirror that will get the job done on your 2022 Ford Ranger, I recommend the K-Source Universal Towing Mirrors - Clip On #KS69ZR. The K-Source mirrors will provide you with 7-3/4 inches tall x 5-1/8 inches wide of…

view full answer...

Answer 3

The K-Source Universal Towing Mirrors, #KS69ZR are a confirmed fit for the 2019 Ford Ranger. If you need to remove easily to get into tight spots then this is a good choice. Another good option is the CIPA Universal Dual Lens Towing Mirrors - Clip On…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

My contact at Yates Rubber advises that a nominal 8-inch keel roller does not measure exactly 8 inches; typically they are slightly smaller than the specified size, much the way a piece of 2 x 4 lumber is not exactly 2-inches by 4-inches. I took…

view full answer...

Answer 6

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 7

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

I have added a photo detailing the wiring connections for the Pollack Heavy-Duty, 7-Pole, Round Pin conncetor, #PK11700, see link. This is a SAE J560 compliant connector. The wiring diagram for the vehicle side connector, #PK11720, is pictured also.…

view full answer...

Answer 10

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 11

I looked up pictures of the taillights that are on the 3110 Featherlite trailers and for the LED version of them you would want the part #STL36RB and #STL37RB. It looks like the spare tire mounts for your trailer are something you would have to get…

view full answer...

Answer 12

The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.

view full answer...

Recommended Towing Mirrors For A 2016 Ford Edge

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching