Replacement Idler Hub Assembly for a Dexter Axle 08-248 5 on 4-1/2" Hub
Question:
Will your AKIHUB-543-35-G-K Hub assembly work as a replacement for my Dexter 8-248 Hub 5 bolt, 4 1/2 inch BC with 10 inch wheels? Not seeing that small of wheel size. Thanks
asked by: Dana E
Expert Reply:
The Trailer Idler Hub Assembly for 3,500-lb Axles # AKIHUB-545-35-G-K is the correct replacement for a Dexter 08-248 hub with a 5 on 4-1/2" bolt pattern, yes.
Our idler hub as well as the Dexter Axle replacement option, part # 84545BX, are listed for 13" wheels but if your unique situation is working then you can be confident that the replacement option I mention above will work properly for you.
Products Referenced in This Question
Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Hub
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Continue Researching
- Video: etrailer Trailer Hub and Drum Assembly Review and Installation
- Shop: Trailer Idler Hub Assembly for 2K Axles - 13" to 15" Wheels - 5 on 4-1/2 - Pre-Greased
- Q&A: Comparing 175/80-13 And 185/80-13 Tires
- Q&A: Is a 175/70-13 Tire Size a Trailer Tire or Will a 175/80-13 Fit in Its Place
- Q&A: Comparing Tire Sizes ST185/80D13 and ST175/80R13 and Bias Ply/Radial Tire Construction
- Search Results: 44649
- Article: Most Popular Wheel Bearings
- Shop: Trailer Hitch
- Q&A: Trailer Suspension Hanger Kit for Slipper Springs and 38 inch Wheelbase
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Q&A: Wiring a Camper Shell Third Brake Light on a 2017 Chevrolet Silverado
- Article: Trailer Wiring Diagrams
- Search Results: 25580
- Shop: Trailer Wiring
- Search Results: 68149
- Shop: Gooseneck Hitch
- Q&A: How to Determine if Trailer Axle is Not Aligned and How to Measure to Replace Trailer Axle
- Shop: Grease Seals 10-36 (pair)
- Article: Trailer Tire Sizing
- Video: etrailer Trailer Idler Hub Assembly Installation
- Search Results: dust cap
- Shop: Brake Controller
- Article: Testing Trailer Brake Magnets for Proper Function
- Shop: etrailer Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 5,200 lbs to 7,000 lbs
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Video: etrailer Trailer Idler Hub Assembly Review and Installation
- Search Results: 14125a
- Shop: Fifth Wheel Hitch