Replacement Cover for an Extang Tuff Tonneau Cover on a 2015 Chevrolet Silverado 2500 w/ 6-1/2' Bed

Question

Question:

I am seeking a replacement tarp for a Extang Tuff Tonno snapless on a 2015 Chevy Silverado 2500 regular bed.

asked by: Craig W

0

Expert Reply:

From what I could find, the Extang Tuff Tonneau for your 2015 Chevrolet Silverado 2500 with regular (6-1/2") bed is the 14450 cover. The correct replacement tarp for that cover is the Replacement Tarp for Extang Tuff Tonno Roll-up Soft Tonneau Cover # EX13450.

I do recommend verifying the 14450 is the cover that you have. You can do this by locating the part number. The part number is typically stamped along the underside of the cover, typically located at the driver side cab corner.

expert reply by: Scott S

0

Answer 1

Assuming your Trifecta is a 2.0 model, if your original Tonneau cover is part #EX92430 for a short bed truck the replacement tarp is part #EX89VR. If your Trifecta 2.0 #EX92435 is for a long bed truck, the replacement tarp is #EX62FR. If you…

view full answer...

Answer 2

The Replacement Tarp #EX92870-20 is for the Extang Trifecta 2.0 Soft Tonneau Cover #EX92870. This fits the 1995 - 2004 Toyota Tacoma with a 6' Bed.

view full answer...

Answer 3

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 6

Yes, the TrackTowers part #Y52AV does fit into Yakima HD tracks like what you have installed on your trailer.

view full answer...

Answer 7

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 8

Hey Dustin, thanks for reaching out! I will recommend SumoSprings over Timbrens all day everyday because they are much more forgiving when the vehicle is unloaded. We've actually joked around here about how the Timbren kits will either give you…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only tonneau…

view full answer...

Answer 11

For your setup I recommend the TrackTowers for Yakima Crossbars and Platforms - Track Mount #Y52AV which includes everything you need to mount Yakima crossbars to your Retrax cover (unless you plan on using the Round or HD bars - then you'll need…

view full answer...

Answer 12

The best place to confirm the towing capacity of your 2015 Chevy Silverado 1500 Crew Cab 4x4 with 5.3-liter V8 engine is the printed owner's manual. This will reflect the capacity of your specific pickup with the particular mix of equipment…

view full answer...