Replacement Key Fob And Manual Switch Kit For A Pace Edwards Bedlocker Tonneau Cover

Question

Question:

Aloha, Kevin C. Thanks for responding for my first question about FOB replacement. You asked for specific model of my Pace Edwards truck cover. Here it is: Model: BL2003, Serial No. 0410274, bought and installed in a new 2004 GMC Sierra Denali 1500. I am looking for a new compatible FOB key. The old one seems to be unresponsive at times. Another question: Do you have a kit so I can convert this to manual mode, hardwired to the motor circuit with a switch installed by the instrument panel so I can use as a back-up to open and close the cover? I attached some photos. Thanks,

asked by: Rex C

0

Expert Reply:

For a Pace Edwards Bedlocker tonneau cover you would need the Replacement Remote for Pace Edwards Bedlocker Retractable Hard Tonneau Cover # PE33QJ. Pace Edwards also has the Manual Switch Kit for Pace Edwards BedLocker or UltraGroove Electric Tonneau Cover # 311-BL-1120 that you can use to open and close your cover without the key fob. The wire harness is 17' in length so you could easily run the switch into the cab.

expert reply by: Kevin C

0

Bedlocker Model Number
(click to enlarge)

Answer 1

Replacement key fobs are available for Pace Edwards powered retractable tonneau covers, but we'll need to know the model number in order to find the correct fob for you. The Replacement Remote #PE33QJ for example, is compatible with the Bedlocker…

view full answer...

Answer 2

To replace the rocker switch on your Pace Edwards Bedlocker Tonneau cover you'll need the Manual Switch Kit for Pace Edwards BedLocker #311-BL-1120.

view full answer...

Answer 3

I have included the process for programming the Replacement Remote for Pace Edwards Bedlocker Retractable Hard Tonneau Cover #PE33QJ for you below. 1. Disconnect the power to the Bedlocker unit. (This can either be done at the battery or at the…

view full answer...

Answer 4

The instructions for programming the Bedlocker Remote part #PE33QJ are the same for a single remote or if there's two. 1. Disconnect the power to the Bedlocker unit. (This can either be done at the battery or at the canister where the wires come…

view full answer...

Answer 5

You do not need the original remote to program the replacement remote part #PE33QJ. You need to disconnect power to the Bedlocker unit. Reconnect the power and immediately push the open button on the remotes you want to program (I think this is the…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

The correct Roadactive kit that fits your 2023 Ford F-150 is the part #RAS3611-YHD. I really like the RAS kits as they basically don't have any downsides. You get the adjustable support, an easy install, no maintenance, and actually improves…

view full answer...

Answer 10

Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only tonneau…

view full answer...

Answer 11

The manual switch for the Pace Edwards Bedlocker Retractable Hard Tonneau Cover #PE44CV can be found as part #311-BL-1120 on our site. This plugs into the harness at the canister and then you route and install the switch wherever it works best for…

view full answer...

Answer 12

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Replacement Key Fob And Manual Switch Kit For A Pace Edwards Bedlocker Tonneau Cover

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching