Recommended Base Rail Kit For A 2001 Chevy Silverado 3500 8' Bed With RBW Lil Rocker

Question

Question:

i am looking for an installation kit for a RBW Lil Rocker gift wheel hitch. To be installed on a 2001 Chevy 1 ton dually with a long bed.

asked by: Phil C

0

Expert Reply:

If your RBW Lil Rocker has ISR spacing (22" front to back from center of the feet) then you can use the Curt Custom Fifth Wheel Installation Kit for Chevy/GMC # C16418-204. If not then you would need to reach out to the manufacturer of the hitch for the specific rails that would fit.

expert reply by: Kevin C

0

Answer 1

yes, the Curt Custom Fifth Wheel Installation Kit part #C16420-104 are industry standard rails which is what the RBW Lil Rocker needs to fit. You will not have any issues using the RBW Lil Rocker on these rails. They are designed for a 2003 to 2012…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more necessary.…

view full answer...

Answer 6

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 7

Yes! I went ahead and attached the installation instructions of the Demco Underbed Rail and Installation Kit #DM8551004 (Demco part 8551004) to this answer.

view full answer...

Answer 8

Not confusing at all. I took a look online and the 2001 Silverado 2500HD has a 12,000 lbs bumper pull towing capacity and a 15,200 lbs 5th wheel towing capacity. It's just two different capabilities of the truck. The extra weight of a 5th wheel…

view full answer...

Answer 9

Yes, it will! The B&W Universal Base Rails and Installation Kit for 5th Wheel Trailer Hitches item #BWRVR3200 includes industry standard 5th wheel rails that are compatible with the Reese 30032 5th wheel hitch. The Reese 30032 uses the same…

view full answer...

Answer 10

There are 4 wires coming out of the back of the Draw-Tite Activator IV Brake Controller part 5504. You are correct in that the black wire runs to the positive side of the vehicle battery through a circuit breaker. The white wire runs to the negative…

view full answer...

Answer 11

Most fifth wheel rails are made to the same industry standard dimensions. They aren't all though. If you measure 22 inches on center between the two rails and they look like the rails of the #RP30035 that you referenced they would be the industry…

view full answer...

Answer 12

The grease cap part number that you referenced cross references to a drive in cap with a 2.44 inch outside diameter. If you have a standard cap then the Grease Cap, 2.44 inch OD Drive In, item #RG04-060, is the correct part. If you have a grease…

view full answer...

Recommended Base Rail Kit For A 2001 Chevy Silverado 3500 8' Bed With RBW Lil Rocker

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching