Will Malone Channel Loader Kayak Load Assist Damage Car Paint

Question

Question:

Will this mark or damage the painted surface on a vehicle? I am looking for a way to assist loading a kayak on my 2023 GMC 3500HD Denali.

asked by: Allen H

0

Expert Reply:

The Malone Channel Loader Kayak Load Assist # MAL48FR is designed for safe use on both glass and the painted surface of a vehicle so you'll be good to use this on your 2023 GMC Sierra 3500! Just make sure your paint is clean prior to installing the load assist to avoid any debris scratching the paint.

expert reply by: Jon G

0

Answer 1

From the information you provided it sounds like everything will work together. The Universal Roof Rack Adapter Kit for Malone Telos XL Load Assist #MAL95VR will adapt your Yakima racks to allow you to use the Telos XL Load Assist for Malone Kayak…

view full answer...

Answer 2

Looks like you've done your research! Since you have that front mount hitch on your 2014 Chevy Silverado 2500 you can utilize the Rhino-Rack T-Load #RTL002 and then use their single crossbar system on your cab: 54" Vortex Aero Crossbar -…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 8

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 9

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 12

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...