How to Find Centering of Draw-Tite Max-E-Loader Trailer Hitch Receiver for Motorhome

Question

Question:

what is the measurment from mounting point to center of recept

asked by: Bud T

0

Expert Reply:

The Draw-Tite Max-E-Loader Trailer Hitch Receiver # 41547 is symmetrical so while I don't have the center location of the receiver right off-hand, what I can say is that you will be able to measure the distance between the mounting points (or even the frame of your vehicle) and the receiver will be right in the middle of that measurement (see attached).

expert reply by: Jon G

0

Draw-Tite Max-E-Loader Trailer Hitch Receiver
(click to enlarge)

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 4

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 5

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 6

The first thing you'll need to flat tow your 2015 Chevy Malibu LS is a base plate kit like the Roadmaster part #RM-523178-5 that is a confirmed fit. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting,…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Yes, the Blue Ox Acclaim Non-Binding Tow Bar #BX4330 would be a compatible fit with the Blue Ox Base Plate Kit #BX2650.

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

Hey Phil, so we may have a few potential options, but I will be honest with you, we do not really have any base plate installers that are very close to you. Our closest would be like the Bakersfield or Pase Robles area. I have linked our installer…

view full answer...

Answer 11

The instructions for the Demco Tabless Base Plate Kit #DM77YV are being added to page but I'll also send them to you separately. In the instructions they only show that the air dam needs a chunk cut out and that the shutters would remain. The…

view full answer...

Answer 12

To flat tow your Jeep Wrangler JK behind your motorhome, you will need a base plate kit, tow bar, safety cables, tail light wiring harness, and a supplemental braking system. Depending on the year of your Wrangler, you may also need a Brake-Lite…

view full answer...

How to Find Centering of Draw-Tite Max-E-Loader Trailer Hitch Receiver for Motorhome

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching