Will the Rhino-Rack Nautic Stack Kayak Rack Work W/ The Yakima OverHaul HD?

Question

Question:

Will the Rhino Rack Nautic Stack work with the Yakima Overhaul HD? Ive read bad reports on the Yakima stacker. Ive always used the Thule stacker, but just updated my rig to the Yakima rack. So, Im hoping the Nautic Stack might be an option?

asked by: Joey

0

Expert Reply:

Yes, since the Yakima Overhaul HD # Y01151-57 use Yakima's heavy duty crossbars the Rhino-Rack Nautic Stack Kayak Roof Rack w/ Tie-Downs # RRS520 will work just fine.

I did also go ahead and confirm that fit with Rhino-Rack as well and they have it listed as a fit so there won't be any issues.

expert reply by: Bryce D

0

Answer 1

The BAK Revolver X4s Hard Tonneau Cover item #BAK56ZR won't work with the Yakima Overhaul Ladder Rack Item #Y01151-5955 because it doesn't have t-slots. There isn't one that comes with t-slots either. You don't sound too enthusiastic…

view full answer...

Answer 2

The RetraxPRO XR Hard Tonneau Cover w/ Trax Rails - Retractable - Aluminum - Matte #RTT-80384 has a canister that is 13-3/4 inches wide and sits 11-5/8 inches deep from the top of the bed rail. The RetraxPro and the Pace Edwards Jackrabbit…

view full answer...

Answer 3

A tonneau cover like the Retrax PRO XR with Trax Rails #RTT-80245 sits on top of the bed rails of your 2019 Ram 1500. This tonneau has T-slots that sit on the outer part of the Trax rails, which is what the Yakima Overhaul HD with 58" long bars…

view full answer...

Answer 4

The T-Slot rails you mentioned, part #TH65FR are compatible with the following BAK tonneau covers: G2, MX4, Revolver X2, and Revolver X4. I'm,not familiar with the model you specified, but as long as your tonneau mounts to the inside rail of the…

view full answer...

Answer 5

Yes the Yakima Overhaul HD part #Y01151-5755 fits directly to the Truxedo Rail Kit part #TH75FR you referenced without any additional adapters.

view full answer...

Answer 6

If you have the Truxedo TS Elevate rails that fit your 2022 Ford Maverick part #TH25FR the Yakima HD Overhaul Ladder Rack part #Y01151-5755 will fit it. We've confirmed this fit.

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 9

Yes, you are going to also need the Demco Autoslide Capture Plates for Trailair Rota-Flex Pin Boxes #DM6171 when using the Demco Autoslide 5th Wheel Trailer Hitch w/ Slider #DM8550040 with your Road Armor pin box. For a suspension enhancement I…

view full answer...

Answer 10

Hello Tim. We can definitely set you up with a complete AC system with an Advent low profile unit. We currently do not offer these parts as a package, but you can purchase all of the exact same components separately. To answer your question, yes, the…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only tonneau…

view full answer...

Will the Rhino-Rack Nautic Stack Kayak Rack Work W/ The Yakima OverHaul HD?

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching