What is the Standard Roof Vent Size Opening and Are They All This Size

Question

Question:

Are all vent opening one standard size

asked by: Chris

0

Expert Reply:

There is a standard vent size opening which is 14" wide x 14" long but not all of them follow this rule so you will need to measure to be sure. The Camco RV and Enclosed Trailer Roof Vent Cover part # CAM40453 fits the standard 14" wide x 14" long roof vent opening. This cover will allow you to keep your vent open at all times even in inclement weather.

I have attached a review video of the roof vent cover for you as well.

expert reply by: Conner L

0

Answer 1

In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also…

view full answer...

Answer 2

We do! Pretty much every trailer roof vent is classified as a 14" x 14" vent but if you take the outside to outside dimensions the lid actually measures closer to 15" x 15". For example, the Vent Cover for Ventline Old Style…

view full answer...

Answer 3

We have the Camco RV Refrigerator Vent Cover in White #CAM42160 or Black #CAM42163 this is designed to work with Norcold and Dometic refrigerator roof vents. There are 2 sets of holes that will need to be drilled out for either the Norcold or Dometic…

view full answer...

Answer 4

The Everchill Refrigerator for RVs - Frost Free - Double Door - Stainless Steel - 10 Cu Ft - 12V #324-000119 has a current rating of 11 amps at 12 volts. 12 gauge wire at 20 feet is rated to offer 20 to 22 amps, so I don't know why they are…

view full answer...

Answer 5

The Everchill Refrigerator for RVs #324-000119 does not come with a trim kit, though that's certainly a good idea to give your trailer the clean look you are after. You could add your own pretty easily if you wanted to embark on a small project…

view full answer...

Answer 6

I recommend the Alpha Systems Butyl Tape for RV Weatherproofing #AL28FJ as it's 1" wide to fully cover the flange of your vent. Make sure you overlap the ends to form a tight waterproof seal. You can see me doing this at 2:50 mark in the…

view full answer...

Answer 7

The outer flange that sticks out to mount the MaxxAir MaxxFan Mini Roof Vent w/ 12V Fan - Manual Lift - 4 Speed - Smoke Item #MA00-04401M is 16-1/4" x 16-1/4" so as long as you have at least 2-1/2" to 3" of space between the panel…

view full answer...

Answer 8

The Replacement Single Zone Thermostat for Dometic RV Air Conditioners #DMC79FR is a single zone 3 wire thermostat like the one you are describing. I have attached the wiring diagram for this thermostat and the control box below for your reference.

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

The difference between the MaxxAir MaxxFan Mini Roof Vent #MA00-04401M and the MaxxFan Roof Vent #MA00A04401K does indeed simply have to do with its profile. The MaxxAir Mini Roof Vent will only extend 2-7/8 inches above the roof when it's closed…

view full answer...

Answer 11

I went out and measured the outside to outside points on the flange for the MaxxAir MaxxFan, part #MA00-04401M, and it's 16-1/4 square. It does fit the standard 14 x 14 vent opening which is what you'll find on most trailers and it's for…

view full answer...

Answer 12

According to my research, AL-KO 8490 references an AL-KO hub for 3,500 lb axles with a 10 x 2-1/4" drum and a 5 on 4-1/2" bolt pattern. For a drum assembly that will work with these hubs I recommend taking a look at the Electric Trailer…

view full answer...

What is the Standard Roof Vent Size Opening and Are They All This Size

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching