Curt Custom Fifth Wheel Installation Kit Recommendation for a 2014 GMC Sierra 2500

Question

Question:

I just want to make sure I buy the right parts the first time. Is part # c16413-104 made for a 2014 gmc crew cab diesel. if not what is the part im looking for thank you

asked by: Anton G

0

Expert Reply:

Yes, the Curt Fifth Wheel Rail Installation kit part # C16411-204 that you referenced would fit your 2014 GMC Sierra 2500. This is a custom install kit that will install in about half the time as a universal kit and will minimize drilling.

I attached an installation video for this kit for you to check out also.

expert reply by: Jameson C

0

Answer 1

Yes, your Reese 5th wheel trailer hitch, #RP30047, will fit the Curt above the bed rails in installation kit #C16426-204. The rails will accept Curt, Draw-Tite, Hidden Hitch, Husky, Reese, and Valley hitches that fit in above the bed rails. And the…

view full answer...

Answer 2

The same Curt fifth wheel custom rail kit fits your older 2015 Chevy Silverado 2500HD and your newer 2017 model, part #C16411-204. For just a new bracket kit all you would need is the part #C16411 which allows you to install the rails you currently…

view full answer...

Answer 3

While the B&W Patriot 5th Wheel Trailer Hitch w/ Slider #BWRVK3270 will fit in the Adapter Rails for Curt 5th Wheel Hitch #C88KR, there is a clearance issue. The issue is that the lever/handle used to lock and unlock the slider is interfered with…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 7

The head alone for the B&W Companion hitch #BWRVK3500 weighs about 70 pounds. Everything else weighs about 130 pounds. So the total weight of the hitch is approximately 200 pounds.

view full answer...

Answer 8

You are correct that this refrigerator does not have an ON/OFF switch or function. The best you can do is "Standby" that draws an unknown amount of power. One option is to pull the 12-Volt fuse at the RV power center. A much better option…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

Most fifth wheel rails are made to the same industry standard dimensions. They aren't all though. If you measure 22 inches on center between the two rails and they look like the rails of the #RP30035 that you referenced they would be the industry…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

To get the B&W Patriot #BWRVK3200 to work with your 2006 Dodge Ram you're going to need a set of 5th wheel rails #DM8552016-71. These rails are custom fit to your vehicle so they'll just bolt right up to the frame. It is worth mentioning…

view full answer...