Part Needed to Add 7-Way to Toyota Highlander With 4-Way

Question

Question:

I need a 2005 Highlander to 7 pin Bargman type plug @ trailer. I know the Highlander is a factory 4 pin and I will need a 30 amp wire from battery as well as fuse and a connector for the 3 wires going to trailer Do you make such a kit or know where to resource ne Thank

asked by: Dan M

1

Helpful Expert Reply:

We have exactly what you need to add a 7-way to your Toyota Highlander, which is the following:

- Universal Installation Kit for Trailer Brake Controller # ETBC7

What you'll do is plug your Highlander's 4-way into the 7-way that comes with the # ETBC7, which also gives you the wiring, circuit breakers, and rest of the hardware needed for installation.

expert reply by: Kyle S

1

Answer 1

Since your 2005 Toyota Highlander came with a factory tow package, you would need Tow Package Wiring Harness with 4 Pole Trailer Connector, #118248. I have included a link to the installation instructions along with a link to a video showing a…

view full answer...

Answer 2

We have two trailer wiring kits that fit your 2004 Toyota Highlander. We have the #118413 which fits all styles of the vehicle and the #118248 which fits the versions of the vehicle that have tow package wiring. This is normally the kit I'd…

view full answer...

Answer 3

If your 2005 Toyota Highlander does not currently have any trailer connector but does have the tow package then you will first need to install a 4-Way such as #118248. If it did not have the tow package you would use #118413. Then you would need a 4…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 7

If you have a vehicle specific wiring harness for a brake controller then that would indicate that you have a factory tow package and subsequently would already have a 7-way at the back of your vehicle. The universal 7-way connector #ETBC7 is meant…

view full answer...

Answer 8

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 9

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 10

For some reason Toyota isn't very forthcoming with how to figure out if you have the tow package or not. From my understanding all of the V6 models of the 2019 Toyota Highlander have the tow package but it isn't specified as to what else…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Part Needed to Add 7-Way to Toyota Highlander With 4-Way

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching