What Tonneau Cover Does Rear Header TX2722-RearHeader Work With?

Question

Question:

How long is replacement part # TX2722-RearHeader?

asked by: Joe

0

Expert Reply:

There is no length measurement given for the Rear Header # TX2722-RearHeader because it only works for the TruXedo TruXport Soft, Roll-Up Tonneau Cover # TX272201 that fits certain 2014-2019 Chevy/GMC 1500/2500/3500 trucks.

If this is not the cover you have then this will not work.

To find the right part for you I'll need to know the specific tonneau cover you have on your truck.

expert reply by: Samuel C

0

Answer 1

If you have a TruXedo Lo Pro or Edge Tonneau Cover like the one you linked to then you'll just need the Replacement Header Stop #TX1704187.

view full answer...

Answer 2

Since you have a 2003 Chevy Silverado 1500 with a 6-1/2 foot bed the correct rear header would actually be the part #TX2811-RearHeader and not the part number you mentioned.

view full answer...

Answer 3

Yes the Replacement Rear Header for Truxedo Truxport Tonneau Cover #TX2722-RearHeader is a kit. This would also work with a Truxport latch kit you have now of #TX1117755.

view full answer...

Answer 4

Since you have a Truxedo TruXport tonneau cover the correct replacement latches would be the part #TX1117755. The cover would have to have been made after 2011 so you'd have to think back to the year you bought the tonneau. If it's older we…

view full answer...

Answer 5

To install replacement latches #TX1117755 you will need to remove the tailgate header rail from the side rails. Then you would remove the one fastener per latch holding the old ones on. Next slide off the old latches, slide the new ones into place,…

view full answer...

Answer 6

If you are need of the front header and rear header for the #TX281101 you'd need the #TX2811-FrontHeader and the #TX2811-RearHeader for the rear header. Then for the tarp you'd want the #TX281101-CVR and you'd be set.

view full answer...

Answer 7

The correct replacement rear header for your 2017 Ram 1500 5.5 foot bed with a Truxedo Lo Pro is the part #TX5459-RearHeader since the tonneau you have is the #TX545901.

view full answer...

Answer 8

Hey Dustin, thanks for reaching out! I will recommend SumoSprings over Timbrens all day everyday because they are much more forgiving when the vehicle is unloaded. We've actually joked around here about how the Timbren kits will either give you…

view full answer...

Answer 9

Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only tonneau…

view full answer...

Answer 10

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 11

GM only made a 5.5', 6.5', and 8' bed length for their 2018 Silverado 1500 models. If you're measuring the outside of the bed and not the inside from the bulkhead to the tailgate you'll get a longer length like the 84"…

view full answer...