Replacement Temperature And Pressure Relief Valve For A Dometic GC10A-4E RV Water Heater

Question

Question:

Do you know the dims or sell a replacement check valve for a Dometic GC10A-4E manf date 1/31/2018

asked by: Bill K

0

Expert Reply:

If you're referring to the Temperature and Pressure Relief Valve we offer the # CAM10423, which is in accordance with the specifications listed by in the owner's manual of the Dometic GC10A-4E RV Water Heater. If you're referring to a different part then take a picture and let me know so I can see if we offer what you need to get your water heater back in working order.

expert reply by: Kevin C

0

Answer 1

On the Camco RV Water Heater Temperature and Pressure Relief Valve #CAM10423 the threaded part with the probe is 1/2 inch inner diameter. The similar #CAM10473 is 3/4 inches. Based on your picture you need the 1/2 inch model #CAM10423.

view full answer...

Answer 2

The Foggati tankless water heaters are 100 percent going to be an upgrade over a standard water heater due to their efficiency, as it only uses energy when you turn on the hot water instead of a standard heater that is always using up energy to keep…

view full answer...

Answer 3

We do have a water heater that you can use as a replacement for your Atwood GC6AA-10E, but this particular water heater has been discontinued, so you'd need a different option. You'll just need to ensure the heater fits in the same cut out as…

view full answer...

Answer 4

Definitely a smart idea to replace your Atwood heater with a tankless unit, as they are much more energy-efficient and quicker to heat your water. We do have an option that will easily fit in place of your 16" x 15-1/2" x 20-7/8"…

view full answer...

Answer 5

You'll want to replace the check valve with the part #P23415LFVP if the internal components of what you have now are coming out.

view full answer...

Answer 6

To replace your Atwood RV Water Heater, Model #GC10A-4E, the direct replacement is the Atwood RV Water Heater - Gas and Electric - part #AT94022. This is the new version of your existing water heater, so it will have all the same features like a…

view full answer...

Answer 7

The Dometic RV Water Heater - Gas - Automatic Pilot - 12 Volt - 8,800 Btu - 6 Gal Tank Item AT96121 is the direct replacement for the GC6AA-10E. Unfortunately it is out of stock with no expected restock date. Instead I recommend the Furrion RV…

view full answer...

Answer 8

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 9

The best replacement option we offer for a Atwood GC10A-4E Water Heater is tankless, the Furrion RV Tankless Water Heater part #FR68SR. It won't be a direct replacement but still pretty easy nonetheless as they are very similar. That said, you…

view full answer...

Answer 10

Hey Jeff, appreciate all the details you provided that was super helpful and we do have the MORryde cushioned pin box that is designed to replace a Lippert Rhino pin box. For the 17,695 lb GVWR you mentioned on the 2024 Brinkley Model Z 3610, what…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

The Access Toolbox Edition Soft, Roll-Up Tonneau Cover #A93VR is designed to fit the youru 2022 Ram 3500 with a 8' dually bed. The Cover #A37FR will only fit an 8' bed with single rear wheels. This is the only difference in these covers is…

view full answer...