Recommended Hitch for a 2008 Nissan Versa Hatchback and Where to Get it Installed
Question:
I need a class 3 hitch receiver installed for a 2008 nissan versa hatchback
asked by: Mrs. W
Expert Reply:
The best hitch for your 2008 Nissan Versa Hatchback is going to be the Curt Trailer Hitch item # C11348 you were looking at. To get it installed you will want to scroll down the left side of the hitches product page and go below the pictures and videos. You will see a blue link that says Locate installers near me. Go ahead and click on this and put in your zip code and you will find a list of reputable installers near you.
This is the highest capacity hitch available for your car. There are no class III hitches. The Curt Hitch item # C11348 is a class I hitch with a 1-1/4" receiver.
If you are planning on towing you will also need a wiring harness item # C56021 and the Draw-Tite Drawbar item # 3593 and then for hitch balls item # 19258 for a 2 inch ball or item # 19256 for a 1-7/8 inch ball.
Products Referenced in This Question
1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 6-5/8" Long - 2K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 3 Inch
- Rise - 2 Inch
- Fits 1-1/4 Inch Hitch
- 2000 lbs GTW
- Class I
- Draw-Tite
more information >
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Visible Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Article: Trailer Maintenance Schedule
- Q&A: Recommended Hitch for a 2011 Nissan Versa
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: What Size Fish Wire Bolt Leader Is Used For Replacing Hardware On a 2011 Nissan Versa Receiver?
- Q&A: What Size Socket Works with 1 Inch Spindle Castle Nut # 165686?
- Article: Top Gifts for Dads in 2024
- Q&A: Dimensions Of The RV Propane Gas Detector # RS64FR
- Q&A: How to Carry 3 Bikes on a 2011 Nissan Versa Hatchback
- Q&A: Potential Replacement Options For a Fastec 44610 Entry Door Lock
- Article: Routing the Power Wire for a Trailer Wiring Harness
- Q&A: Aluminum vs. Steel Cargo Carrier are there Any Disadvantages for Aluminum Construction
- Article: How to Correct Noise from Exhaust Rattling Against a Trailer Hitch
- Article: Trailer Hitch Receiver Sizes
- Article: Hitch Adapters and Extenders