Is Progressive Dynamics Converter # PD4645V Lithium Compatible

Question

Question:

There is a direct contradiction between two answers on Lithium compatability. Does this model have a way to switch from lead charging profile to lithium? One expert says there is an easy access jumperinch to switch to lithium. By the way, what is a jumper? The other expert says, The # PD4645V is a standard model thats only compatible with lead acid, AGM, and gel batteries. Thanks in advance for the help!

asked by: Josh V

0

Expert Reply:

Yes, the Progressive Dynamics Converter # PD4645V can be switched to a lithium profile. This is a recent update for this converter which is why there is some outdated info out there on it. A jumper is basically just a small switch on the circuit board.

expert reply by: Jameson C

0

Answer 1

The Progressive Dynamics Replacement Section #PD4655V does have a jumper to change the charging profile to lithium compatible. You'll simply need to move the black jumper over from the WIZ side to the LI side.

view full answer...

Answer 2

The correct part to replace your current converter charger is the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 55 Amp part #PD4655V. This is an exact replacement and will be all you need to get back operational. I have…

view full answer...

Answer 3

Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp #PD4645V is what you need as a replacement lithium compatible converter for your 6345 Parallax model.

view full answer...

Answer 4

We have valve stem extension kits like the part #WM8001-135 which were designed for use with dually wheels like what you have on your 2016 Ford F-350.

view full answer...

Answer 5

Yes, the Progressive Dynamics Replacement Section #PD4645V that you referenced is compatible with lead acid batteries.

view full answer...

Answer 6

Yes, you can safely upgrade to the 45 Amp Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers #PD4645V for a more powerful system but to get the full benefits you'd have to pretty much upgrade your whole electrical system so…

view full answer...

Answer 7

The instructions for the Progressive Dynamics Replacement Section for AC/DC Power Distribution Panel - 45 Amp #PD4645V have multiple model numbers on them since each model has basically the same installation instructions. They do breakout each…

view full answer...

Answer 8

The Replacement Converter for Parallax/Magnetek Power Centers item #PD4645V you were looking at is the most direct replacement for the Magnetek 6300 series at 45 amps. It will work with flooded lead acid, AGM, gel batteries, and is made in the USA.

view full answer...

Answer 9

You are correct, the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers #PD4645V does have a small, easily accessible jumper that switches the charger from "charge wizard" for all lead-acid batteries, to…

view full answer...

Answer 10

Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp #PD4645V is what you need as a replacement lithium compatible converter for your 6345 Parallax model.

view full answer...

Answer 11

The correct replacement converter for your Parrallax 7300 Model 7355 is the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 55 Amp #PD4655V. This is an exact replacement but it only comes as a full assembly, you can not…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...