Does The Progressive Dynamics 4645V Have A Lithium Jumper For Charging Lithium Batteries?

Question

Question:

Does the PD4645V that you sell have the board jumper that converts the charger from lead acid/AGM to lithium charge profile. I think about three years ago this feature was added to the PD4645V and wanted to make sure yours had this jumper on the main board. Thanks

asked by: Lee A

1

Helpful Expert Reply:

You are correct, the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers # PD4645V does have a small, easily accessible jumper that switches the charger from "charge wizard" for all lead-acid batteries, to "lithium".

On the lithium setting this has a continuous voltage output of 14.6V, compared to the max voltage output of the charge wizard of 14.4V.

I have also included a product overview video of # PD4645V for you to check out as well.

expert reply by: Bryce D

1

Answer 1

The Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers #PD4645V is compatible with lithium batteries. Although it is not specifically listed, all current parts from Progressive Dynamics like this converter are designed to work with…

view full answer...

Answer 2

Yes, the Progressive Dynamics Converter #PD4645V can be switched to a lithium profile. This is a recent update for this converter which is why there is some outdated info out there on it. A jumper is basically just a small switch on the circuit…

view full answer...

Answer 3

Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp #PD4645V is what you need as a replacement lithium compatible converter for your 6345 Parallax model.

view full answer...

Answer 4

Thank you for the photo it was definitely helpful. What it shows is you have a 45 amp Parallax/Magnetek model 6345 converter, and we do have the exact replacement you need, which is the following: - Replacement Converter for Parallax/Magnetek or WFCO…

view full answer...

Answer 5

The Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers #PD4645V is exactly what you need for your Magnetek 7300. I reached out to my contact at Progressive Dynamics who confirmed this.

view full answer...

Answer 6

The instructions for the Progressive Dynamics Replacement Section for AC/DC Power Distribution Panel - 45 Amp #PD4645V have multiple model numbers on them since each model has basically the same installation instructions. They do breakout each model…

view full answer...

Answer 7

If you are just looking for a new converter, the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers part #PD4635V will be a direct upgrade for the Magnetek Converter Series 6300 Model 6332 that you have now.

view full answer...

Answer 8

According to Progressive Dynamics, their #PD4645V Replacement 45A converter would be the proper replacement for your Parallax 7345 power converter. The unit is designed as a direct replacement for the converter in your existing power…

view full answer...

Answer 9

We offer a direct replacement for your current 45A Parallax/Magnetek 6345 Power Center. The Progressive Dynamics Replacement Converter, part #PD4645V is exactly what you'd need. I've linked to a product description video for the #PD4645V…

view full answer...

Answer 10

The Progressive Dynamics RV Power Control Center with AC/DC Panel and Converter/Smart Charger - 35 Amp item #PD4135K is the replacement for the Magnetek 6300 Q series RV converter. It comes with the front cover. The AC breakers and DC fuse…

view full answer...

Answer 11

The Progressive Dynamics Replacement Section #PD4655V does have a jumper to change the charging profile to lithium compatible. You'll simply need to move the black jumper over from the WIZ side to the LI side.

view full answer...

Answer 12

The fan in the #PD4645V is temperature controlled so typically it does not run continuously. However, if there are heavy loads you can expect the fan to run non-stop. According to Progressive Dynamics, this can also happen if you're charging…

view full answer...