What Does Curt PowerRide 5th Wheel Trailer Hitch # C16039 Weigh

Question

Question:

how much does a curt power ride 30000 hitch weigh

asked by: Gary D

0

Expert Reply:

The Curt PowerRide for GM tow package part # C36WR that you referenced weighs 91 lbs.

expert reply by: Jameson C

0

Answer 1

The Reese M5 5th Wheel Trailer Hitch for Chevy/GMC Towing Prep Package, #RP26FR, has a shipping weight of 157 lbs.; a portion of that value is packaging.

view full answer...

Answer 2

Yes, you're able to install a stationary 5th wheel hitch on your 2022 Chevrolet Silverado 2500. The Curt PowerRide 5th Wheel Trailer Hitch for Chevy/GMC Towing Prep Package #C36WR will drop into the 4 receiver pucks that built into your factory…

view full answer...

Answer 3

Either the Reese M5 part #RP30922 or the B and W Companion part #BWRVK3300 that you referenced would do an excellent job for you as these are both premium fifth wheel hitches that RVers across the country love with enough capacity for your trailer.…

view full answer...

Answer 4

Minus the shipping packaging, the B&W #BWRVK3710 Companion 5th wheel hitch for the 2020+ Chevy/GMC in bed puck package weighs about 130 lbs. The hitch head can be easily be removed by pulling the saddle pins which will reduce the weight of the…

view full answer...

Answer 5

While it's possible that a truck can simply be too tall to tow a fifth-wheel trailer level, it's difficult to determine this with only the truck bed height, as the height of the particular trailer you are wanting to tow will also affect this.…

view full answer...

Answer 6

To drop the front of the pin box and thus lower the front of the fifth wheel, you'd need to RAISE the pin box, not lower it. Lowering the pin box would raise the height of the fifth wheel at the front. If you have an available set of holes at the…

view full answer...

Answer 7

Yes, the Cut Q25 fifth wheel hitch part #C16049 that you referenced is a confirmed fit for the OEM pucks of your 2023 Ram 2500 short bed. While this says its' for the long bed truck it would fit just fine in a short bed truck as well. Typically…

view full answer...

Answer 8

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 9

The best fifth wheel hitch for your 2020 Ford F-250 with a short bed and the 5th wheel prep package is easily the B&W Companion because of its immense jaws, cushioned bushings, and pivoting head, which combine to give you the most comfortable…

view full answer...

Answer 10

Hey Bill, great question! The Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box - Lippert 1116 and 1716 - 30,000 lbs - 4.5K TW #GY45SR will fit in place of your MORryde RPB72-1716, but you'll want to verify that the 4.5K TW rating is best for your…

view full answer...

Answer 11

Thanks for the picture of Curt Q25 handles you need. Based on that the correct replacement is the part #C38UR.

view full answer...

What Does Curt PowerRide 5th Wheel Trailer Hitch # C16039 Weigh

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching