Will The Furrion Marine Speaker FMS5L2BLOEM Fit The Same Hole A The FMS5B

Question

Question:

Is this Furrion speaker interchangeable fit-wise with the Furrion FMS5B? Thx.

asked by: Jeff N

0

Expert Reply:

Yes, from what I can find on the Furrion FMS5B it requires a 4-3/8" diameter x 1-9/16" deep cutout hole just like the Furrion Marine Speaker w/ LED Lights # FMS5L2BLOEM.

expert reply by: Kevin C

0

Answer 1

If you're looking for the garnish ring that screws into the ceiling of the trailer then you'll need part #VA0445-29 for a birch white finish. If you're looking for the inner frame and screen then you'll want part #BVC0573-31.

view full answer...

Answer 2

There's no guide that tells us the size or part number of the speakers installed on your 2017 Jayco Jay Flight 28BHBE travel trailer, but 6" speakers like the Furrion Marine Speaker w/ LED Lights #FMS5L2BLOEM are a pretty standard for most…

view full answer...

Answer 3

The depth of the Furrion Marine Speaker with LED part #FMS5L2BLOEM is 2-1/8" so you will need at least this much space to be able to properly mount the speaker. It is a pretty shallow speaker as far as mounting goes and requires the least amount…

view full answer...

Answer 4

We have actually spoken with Ventline regarding your model AS-13 M-VD0449 in the past and they have confirmed that the correct replacement cover is the part #BVD0449-A03 in Smoke or #BVD0449-A01 in White. The cover measures 14 inches x 14 inches and…

view full answer...

Answer 5

I'm not quite sure what you mean by the "heart", however for your Ventline VD0434 we have the replacement screen frame #BVA0444-32, the replacement screen #BVD0434-31, the replacement lid #BVD0449-A01, and the replacement ceiling…

view full answer...

Answer 6

We have had a similar question to this come up and we were able to determine that the number AS-13 M-VDO449 that you listed is stamped on the vent cover part #BVD0449-A01. If you are looking for the entire fan setup and not just the cover you would…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Will The Furrion Marine Speaker FMS5L2BLOEM Fit The Same Hole A The FMS5B

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching