How Much Depth Is Needed To Mount the Furrion Marine Speaker with LED

Question

Question:

cut out depth?

asked by: Hec

0

Expert Reply:

The depth of the Furrion Marine Speaker with LED part # FMS5L2BLOEM is 2-1/8" so you will need at least this much space to be able to properly mount the speaker. It is a pretty shallow speaker as far as mounting goes and requires the least amount of depth out of all our marine 6" speakers.

expert reply by: Conner L

0

Answer 1

If you're looking for the garnish ring that screws into the ceiling of the trailer then you'll need part #VA0445-29 for a birch white finish. If you're looking for the inner frame and screen then you'll want part #BVC0573-31.

view full answer...

Answer 2

There's no guide that tells us the size or part number of the speakers installed on your 2017 Jayco Jay Flight 28BHBE travel trailer, but 6" speakers like the Furrion Marine Speaker w/ LED Lights #FMS5L2BLOEM are a pretty standard for most…

view full answer...

Answer 3

Great News! The Furrion Marine Speaker with LED -part #FMS5L2BLOEM already has blue LED's installed in it. While the housing itself is black the LED's inside are blue when lit up. Check out the video on them I have attached for you.

view full answer...

Answer 4

Yes, from what I can find on the Furrion FMS5B it requires a 4-3/8" diameter x 1-9/16" deep cutout hole just like the Furrion Marine Speaker w/ LED Lights #FMS5L2BLOEM.

view full answer...

Answer 5

I went out to the warehouse and took some measurements of the Furrion RV Outdoor Speaker #FMS5B. The inner diameter that you mentioned is 5" while the bolt holes measure 5-1/2" diagonally and 3-7/8" across from each other, as you can…

view full answer...

Answer 6

The screw holes for the Jensen Marine Speakers #MS5006BR are 3-3/4" from side to side or top to bottom and 5-1/2" diagonally.

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

I reached out to Timbren, who told me the the actual jounce springs are both the same height at 3-3/4 inches, but the bracket height is different. So there aren't shorter springs, and the correct fit for your 2019 Toyota Tacoma 4WD is going to…

view full answer...

Answer 11

We have actually spoken with Ventline regarding your model AS-13 M-VD0449 in the past and they have confirmed that the correct replacement cover is the part #BVD0449-A03 in Smoke or #BVD0449-A01 in White. The cover measures 14 inches x 14 inches and…

view full answer...

Answer 12

Thanks for reaching out, Michael! The Dexter Electric Trailer Brakes #K23-086-087-00 are compatible with 3,500 lb axles and have the standard 4-bolt pattern so if that matches the specs of your axle then this will definitely work for your…

view full answer...

How Much Depth Is Needed To Mount the Furrion Marine Speaker with LED

Product Page this Question was Asked From

Continue Researching