Recommended Replacement For A PowerGear Slide Out Motor 13-1086

Question

Question:

I am looking for a Power Gear 520526 gear motor for an rv slide

asked by: Lou C

0

Expert Reply:

I spoke with Lippert and found that their replacement for your PowerGear Slide Out Motor 13-1086 is the Replacement Gear Motor Assembly for Lippert Slide-Out # LC386321.

expert reply by: Kevin C

0

PowerGear 13-1086
(click to enlarge)

Answer 1

We have had this question before and Lippert has told us that Replacement Gear Motor Assembly for Lippert Components Slide-Out #LC386321 will work as a replacement for motor 520015.

view full answer...

Answer 2

There are two replacement slide out motors for you, one with a connector on the end of the wires and one without a connector on the end of the wires. If you do not have the connector then you will need the Replacement Gear Motor Assembly for…

view full answer...

Answer 3

There are two replacement slide out motors available to replace your current 5078-025, one with a connector on the end of the wires and one without a connector on the end of the wires. If you do not have the connector then you will need the…

view full answer...

Answer 4

There is a gear in the housing of the Replacement 18:1 Venture Motor and Driveshaft with Right Angle Gear Box #LC117292 right by where you would bore through so you run the risk of it interfering with the operation of the motor. You'd also…

view full answer...

Answer 5

The Replacement 18:1 High Speed Motor Assembly for Lippert Components Venture Actuator and Slide-Out part #LC295380 is only offered by Lippert as a complete unit with the motor and gear. The motor is not available separately from Lippert.

view full answer...

Answer 6

Based on the number you mentioned I do have a solution for you, but the gearbox and motor of what you have/need are not sold separately so you'd have to go with the Replacement 18:1 Tuson Motor for Lippert Through-Frame Slide-outs part…

view full answer...

Answer 7

Thanks for the info you listed. Based on that the correct replacement motor is the part #LC295380.

view full answer...

Answer 8

We have a couple of options for gear packs for LCI through-frame or above-floor slide-outs, depending on a couple factors. If you have a 2-1/2" x 2-1/2" through-frame slide manufactured before October 2013, there is a gear available, the…

view full answer...

Answer 9

I spoke with Lippert and found that their replacement for your PowerGear Slide Out Motor 13-1086 is the Replacement Gear Motor Assembly for Lippert Slide-Out #LC386321.

view full answer...

Recommended Replacement For A PowerGear Slide Out Motor 13-1086

Product Page this Question was Asked From

Continue Researching