Replacement Brake Assemblies for a Dexter Axle Part # 60826

Question

Question:

My 2010 Cameo fifth wheel ha Dexter Axles # 60826. What brake assembly do you have that will fit my axles? I would like to replace the whole assembly. Also, do you have a video showing this replacement process? Thanks,

asked by: Randy T

0

Expert Reply:

It looks like the Dexter axle part # 60826 is a 7,000 lbs capacity axle. To replace the brake assemblies, I recommend the Dexter Electric Trailer Brake Kit - 12" - Left and Right Hand Assemblies - 7,000 lbs item # 23-180-181. You will need one set per axle.

I have linked an installation video below.

expert reply by: Jerred H

0

Answer 1

According to Dexter, the torque should be between 25-50 ft. lbs. when installing the #23-180-181. If you don't already have mounting hardware you'll need the Mounting Bolts and Hardware for 12" Brake Assemblies #BRKH12.

view full answer...

Answer 2

To find the correct replacement electric drum brakes for your 2007 Weekend Warrior LE3105 you'll need to know the axle capacity. To find yours you'll just need to look on the axles for the axle tag, which will tell you the capacity. Given…

view full answer...

Answer 3

The only difference between the Dexter Electric Trailer Brake Kit part #23-180-181 and Dexter Nev-R-Adjust Electric Trailer Brake Kit part #23-464-465 is that the latter is self-adjusting which means the pads will automatically adjust for the best…

view full answer...

Answer 4

I attached a picture that shows the bolt pattern of the trailer brake assembly part #23-180-181 that you referenced.

view full answer...

Answer 5

The difference between the Dexter Electric Trailer Brake Kit - 12" - Left and Right Hand Assemblies - 7,000 lbs #23-180-181 and the #23-105-106 you mentioned are the strength of the brake magnets. The #23-180-181 was designed for 7000lb axles…

view full answer...

Answer 6

When adjusting trailer brake assemblies like the Dexter 7k set part #23-180-181 you want to tighten them down till there is a light drag on the wheel as you turn them by hand. To see how to manually adjust trailer brake assemblies check out the video…

view full answer...

Answer 7

The Dexter Trailer Brake Assemblies 023-466-00 and 023-467-00 will cross-reference to our Dexter Nev-R-Adjust Electric Trailer Brake Kit part #23-458-459.

view full answer...

Answer 8

Yes, 7k trailer axle brake assemblies like #23-180-181 will fit 6k axle hub/drums. They use the exact same dimensions and bolt patterns which allows that. The difference is the strength or sensitivity of the magnets in the assemblies. The 7k axles…

view full answer...

Answer 9

Yes, the Dexter Electric Trailer Brake Kit part #23-180-181 (23-180 + 23-181) is a top of the line option so if you are looking for a more cost effective solution I recommend the Electric Trailer Brake Kit part #AKEBRK-7-SA instead. These brakes are…

view full answer...

Answer 10

In order to power the Dexter Electric Trailer Brake Kit part #23-180-181 you'll want to run the 10 Gauge Primary Wire part #10-1-1 (Sold by Foot). In order to make the connections I recommend the Deka Heat Shrink Butt Connectors part #DW05745-5.

view full answer...

Answer 11

Yes the Dexter brake assemblies part #23-180-181 would work in place of the #23-105-106. They are the same size and the capacity range matches as well.

view full answer...

Answer 12

The Dexter Electric Trailer Brake Kit #23-180-181 comes with a left hand and a right hand assembly. If you are needing 4 assemblies you will need to purchase 2 sets of this kit. You can check out the assemblies in the review video I linked for you.

view full answer...

Replacement Brake Assemblies for a Dexter Axle Part # 60826

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching