Front & Rear SumoSprings Helper Springs For a 2014 Coachmen Mirada RV Motorhome Ford F53 Chassis

Question

Question:

Can you provide me with part numbers for front and rear sumo springs for a 2014 Coachman Mirada on an F53 chassis?

asked by: Carlos L

1

Helpful Expert Reply:

Your 2014 Coachmen Mirada on the Ford F53 chassis will use the Front # SSF-170-40-2 and Rear # SSR-180-54-1 SumoSprings helper springs.

If you do not already have a steering stabilizer I recommend installing the Roadmaster Exact Center Steering Stabilizer # RM42RR when you install the SumoSprings. This will help improve steering feel and keep the wheel centered on long trips.

expert reply by: Bud M

1

Answer 1

The RM-RSSP30 you referenced is just the steering stabilizer with no mounting brackets and has been replaced by the #RM-RSSA. The 2013 Fleetwood Bounder Motorhome has a Ford chassis so if you have a 22,000 GVWR then you'll want the…

view full answer...

Answer 2

The models that I can find for a 2011 Fleetwood Terra motorhome show them having a Ford F53 chassis. If this is the case for your model as well then the Roadmaster Exact Center Steering Stabilizer w/ Custom Brackets for Class A Motorhomes #RM33RR…

view full answer...

Answer 3

From my available research on your 2021 Georgetown 36b5 motorhome, it has a Ford F-53 chassis and has a gross vehicle weight rating of 22,000 pounds. Unfortunately, for this particular model, we do not have a steering stabilizer available for your…

view full answer...

Answer 4

The difference between the Roadmaster Reflex steering stabilizers is how they connect to the brackets that fit onto the RV. Take a look at the pictures I attached and you can see the difference between the ends of them. #RM-RSSA has eyes on both ends…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

view full answer...