Bearing Kit that Fits Dexter 7k Trailer Axle 8327834

Question

Question:

What would be the bearings and seals for this axle.

asked by: Timothy F

1

Helpful Expert Reply:

We have a bearing kit for the Dexter 7k trailer axle # 8327834 with the part # BK3-200 which comes with bearings 14125A and 25580 and seal 10-36.

expert reply by: Jameson C

1

Answer 1

We have many styles and sizes of trailer wheel lug nuts shown on the linked page. These are offered in either 60-degree or 90-degree coned profile, in zinc, chrome or stainless and for four different wheel stud diameters. Just click on the feature to…

view full answer...

Answer 2

The recommended lug nut torque for your 7,000lb axle depends on a few factors like wheel size, stud size etc. Check out the attached photo which shows the torque specs for a variety of applications. I see you were looking at the Dexter Nev-R-Adjust…

view full answer...

Answer 3

In order to remove the hub/drum on your trailer you will want to first remove the spindle nut. Once the spindle nut is removed you are going to want to take a hammer and tap the outer portion of the drum as well as the hub face a few times to break…

view full answer...

Answer 4

In order to choose the correct disc brake conversion kit for a 2018 Jayco Seismic 5W Toy Hauler, you'll need to know your axle capacity. This can be found easiest on the axle tag which requires crawling under the trailer. I looked up some of the…

view full answer...

Answer 5

The Dexter Axle, #8327834, uses a 2.25 ID grease seal. This is the case for pretty much all 7K axles out there. You typically see the 2.125 ID seals with 5K to 5.2K axles. If you ever need to replace your hubs in the future, we have the Dexter 7K Hub…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 8

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 9

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...

Answer 10

A BT8 spindle would have a diameter of .99 of an inch where the bearings would both install and would have a diameter of 1.24 where the great seal would ride. That would require a hub part #AKIHUB-440-2-1K for an idler hub. A BTR spindle would have…

view full answer...

Answer 11

To determine the size of the hub assembly you need to purchase you have to determine which bearings are in the old assembly. If the old assembly has L44649 inner bearings, you would use the hub you chose #8-258-5UC1. If the inner bearings are marked…

view full answer...

Answer 12

Thank you for providing the specs for the suspension components that you already have. Correct hanger spacing really depends on the components being used such as springs, hangers and equalizers. Most of the hanger spacing dimensions that we have are…

view full answer...

Bearing Kit that Fits Dexter 7k Trailer Axle 8327834

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching