What Size Bolts and Washers Are Used to Install Curt Hitch on 2023 Mitsubishi Outlander PHEV

Question

Question:

What is the size of the bolts and washers for this hitch?

asked by: Rod

0

Expert Reply:

The Curt Trailer Hitch Receiver # C86FV uses five Hex bolt, M12 - 1.25 x 40mm, CL 8.8 and five Conical-toothed washer, 1/2” for installation. This is confirmed to fit your 2023 Mitsubishi Outlander PHEV.

expert reply by: Robin H

0

Answer 1

Yes, the Curt Trailer Hitch Receiver 13566 #C86FV and the T-One Vehicle Wiring Harness #TK46VR are the correct parts to fit your 2023 Mitsubishi Outlander PHEV. I have linked the installation instructions for both of these below if this is something…

view full answer...

Answer 2

The only wiring that we know will work with your 2023 Mitsubishi Outlander PHEV at this point in time is the Curt Upgraded Circuit Protected Powered Tail Light Converter #C59496 and the ZCI Wiring Kit #119250KIT. The Curt wiring splices into your…

view full answer...

Answer 3

The installation is really simple, and does not require you to do any type of drilling, or do any trimming of the bumper or any fascia when installing the Curt hitch that fits your 2022 Mitsubishi Outlander, which is the following part: - Curt…

view full answer...

Answer 4

Aftermarket hitches often have a max gross trailer weight and tongue weight that exceeds what the vehicle is capable of. You will always be limited by the lowest towing capacity whether that is the hitch or your 2023 Mitsubishi Outlander PHEV. A…

view full answer...

Answer 5

For your 2023 Mitsubishi Outlander PHEV you will need the Curt Trailer Hitch Receiver #C86FV. This has a different mounting bracket on the passenger side of the frame than the Receiver #C87WR you found which does not fit the PHEV. I recommend…

view full answer...

Answer 6

Yes! We do have a hitch available for your 2022 Mitsubishi Outlander. For a great hitch option, I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #C87WR. The Curt hitch provides 525 maximum tongue weight capacity and…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

Hey Justin. To add a hitch to your 2024 Mistsubishi Outlander PHEV, I recommend the Curt item #C86FV. This hitch is custom fit and specially designed for the PHEV model of your Outlander. It is a class III hitch with a 2" receiver, that has a…

view full answer...

Answer 9

We do have a trailer hitch receiver and wiring harness that fits your 2024 Mitsubishi Outlander (non-PHEV), which are the following: - Curt Trailer Hitch Receiver #C87WR - T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #C43WR I…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...