Replacement Rear Clamp Assembly for Yakima Forklift and FrontLoader Bike Carrier
(7 reviews)
Price: $28.99
In Stock
Replacement Rear Clamp Assembly for Yakima Forklift and FrontLoader Bike Carrier
Item # 8880208
Our Price: $28.99
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (7)
- Q & A (0)
- Videos (1)
- Photos
Yakima Accessories and Parts - 8880208
- Roof Bike Racks
- Clamps
- Yakima
- Forklift
- FrontLoader
Replaces the rear clamp assembly on your Yakima Forklift or FrontLoader bike carrier.
Features:
- Replaces rear clamp assembly on Yakima Forklift or FrontLoader bike carrier
- Fits FrontLoader (Y02103) and ForkLift (Y02098)
- Includes tray mount, top pads, bottom aero mount, screw and top fastener
8880208 Replacement Rear Clamp Assembly for Yakima Forklift and FrontLoader Bike Carrier
Video of Replacement Rear Clamp Assembly for Yakima Forklift and FrontLoader Bike Carrier
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of Yakima Replacement Rear Clamp Assembly - 8880208
Hello neighbors, Steven here with etrailer.com. Today we're looking at the replacement rear clamp assembly for your Yakima ForkLift and FrontLoader bike carriers. Now folks, this does replace one rear clamp assembly on either Yakima ForkLift or the FrontLoader bike carriers. It does include the tray mount, the top pads, and the bottom arrow mount, the screw and the top fastener. So you got all those different pads, the fastener, you got the T nut here, retaining nut, and the the T nut there. So again, you would simply just unscrew this, let that pop out, put it over the bar, clamp it back down until it's tight, and then you're ready to go.
So again, this is just one replacement rear clamp assembly again, for the Yakima ForkLift and FrontLoader bike carriers. Folks, it's a direct Yakima part, so you can be sure it's gonna work with those ForkLift and FrontLoader Yakima bike carriers. I'm Steven. Thanks so much for your time. Thanks for watching.
Have fun out there and stay safe on the trails.
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- etrailer mistake
Customer Reviews
Replacement Rear Clamp Assembly for Yakima Forklift and FrontLoader Bike Carrier - 8880208
Average Customer Rating: 5.0 out of 5 stars (7 Customer Reviews)
Replaces the rear clamp assembly on your Yakima Forklift or FrontLoader bike carrier.by: Stephen10/31/2019
Miscalculated height going through an underpass. Miraculously the bottom hinge of the original snapped allowing both the Yakima carrier and bike to flip off the cross bars and land upside down on the seat and handlebars. No damage!
This replacement appears to be the exact plastic gauge of the original. Fit and function exactly as the original. Best price I could find. Quick ship. Very pleased !!! etrailer comes through again! (Note: No etrailer logo was on the product)
by: Paul08/28/2023
Your customer service is outstanding! Always kept me updated on the status of the product. Great touch to proactively reach out to the cut with the latest status! Product arrived on time with the information provided! Keep up the good work!
by: Mark02/27/2022
So I accidentally ran over my Yakima Forklift with my car, breaking some parts but the carrier itself is still in great shape and I hoped to just find the replacement parts. I found the parts I needed at etrailer, and although they were backordered I was regularly updated on my order status. Ultimately the parts arrived before I anticipated and (most importantly) before MTB season! Fit and finish is just as good as the original part. This kept me from having to buy a new carrier - thanks etrailer!
by: Paul 09/21/2020
Although the part I needed was on back order from Yakima and it originally wasn't scheduled to be available until December (I placed the order in mid August), it arrived today. While waiting for the part, I was notified on an ongoing basis as to the order status and was presently surprised at last week's notice that the part was on its way. The folks at etrailer are very courteous and quick with their updates and responses to inquiries.
by: Pieter S05/30/2019
Just what I needed. eTrailer is the perfect place for odds and ends in fixing and maintaining trailers/bike carriers etc. Good selection and reasonable prices.
by: Corey 09/28/2022
Amazing very helpful service!
by: David 03/25/2021
7
7
See what our Experts say about this Yakima Accessories and Parts
- Replacement Front and Rear Clamp Assemblies for Yakima Y01203 FrontLoader Roof Bike CarrierAccording to the folks at Yakima, the front clamp is integrated into the rack and isn't removable, with the exception of the front tensioning handle, which is available as part # 8880190. The rear clamp assembly is available as part # 8880208. The assembly includes the tray mount, top pads, bottom aero mount, screw and top fastener.
view full answer... - Replacement Bar Clamp For Yakima FrontLoader And ForkLiftIf you're wanting to replace the read bar clamp on your Yakima FrontLoader # Y02103, then this is the complete Rear Clamp Assembly # 8880208 but if you think the hardware and clamp # Y8880192 is all you need to replace, we have that as well.
view full answer... - Replacement Rear Wheel Cradle for Yakima FrontLoaderSounds like you are looking for the replacement wheel tray part # Y8880845 which also has the strap for the rear wheel as well.
view full answer... - Will the Replacement Hardware # Y8870043 Fit on the Yakima FrontLoader # Y02103The Replacement Hardware # Y8870043 is for the Yakima BasketCase Roof Rack Cargo Carrier. If you are looking for the mounting equipment for the FrontLoader # Y02103 then we have the Rear Clamp Assembly # 8880208 which is compatible with round bars. If you are needing other replacement parts let me know and/or send me a picture of your bike rack and point out what you need replaced and I can see if it is available.
view full answer... - Replacement Mounting Hardware for Yakima FrontLoader Wheel Mount Bike CarrierThe front mounting hardware is built into the Yakima FrontLoader Wheel Mount Bike Carrier # Y02103 and is not replaceable. We do carry the Replacement Rear Clamp Assembly # 8880208. Do note that this carrier is only capable of fitting crossbars up to 3" wide and up to 1-1/2" tall. If your factory Subaru Crossbars exceed these dimensions you will either need aftermarket crossbars or a different carrier. We do offer the Yakima HighRoad Roof Bike Rack # Y75FR which also offers a channel mount...
view full answer... - Replacement Clamp Assembly for Yakima FrontLoader Bike RackFrom your statement and the pictures, it looks like you are needing the mounts that allow you to attach the Yakima FrontLoader to the crossbars. If that is the case, we do have the rear mount/clamp. - Replacement Rear Clamp Assembly for Yakima Forklift and FrontLoader Bike Carrier # 8880208 But unfortunately, the front mount/clamp is not an available replacement part. If you are needing a replacement front mount/clamp then you would need to pick up a new Yakima FrontLoader Wheel Mount...
view full answer...
- Replacement Lower Bail for Yakima Forklift Bike RackFor the lower bail piece of the Forklift # Y02098 you would want the part # Y8860053. If you wanted the entire mounting clamp you would want the part # 8880208
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Edited by:
Tyler C
Expert Research:
Jameson C
Installed by:
Steven C
Updated by:
Wilson B
Updated by:
Brian T
Written by:
Daron K
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Stephen
11/4/2020
The clamp is working good as new