Brake Controller and Wiring Harness Recommendations for a 2019 Chevy Silverado 1500 LD

Question

Question:

I am having a hard time finding a wiring harness for my 2019 Silverado 1500 LD LT. Can you recommend a controller and harness?

asked by: Greg W

0

Expert Reply:

I'd be more than happy to help out!

The brake controller and wiring harness I recommend for your 2019 Chevy Silverado 1500 LD come from Redarc:

- Tow-Pro Liberty # RED24FR
- Wiring Harness Adapter # 331-TPH-010

I really like this controller because the control part is a simple dial that uses lights instead of codes to give you information about what the controller is doing, and the body of the controller can be tucked up under your dash so you don't have the bigger "brick" style right next to your knee all the time.

I've attached a review video of this controller for you to check out!

expert reply by: Jon G

0

Answer 1

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 2

That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more…

view full answer...

Answer 3

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...

Answer 4

Traditionally, trailer manufacturers did not use electric brakes on boat trailers because the brake magnet wiring and trailer wiring did not always have the best insulation or water protection. These days, more and more manufacturers are using…

view full answer...

Answer 5

Hey Jeremy, Typically with boat trailers the manufacturer will install hydraulic surge brakes because you don't have to worry about the water damaging wires like you would with electric brakes. That being said, if you use a heat shrink butt…

view full answer...

Answer 6

Your air bag mounting location will determine compatibility with the Gooseneck trailer hitch #BWGNRK1313. The side plates of the gooseneck trailer hitch #BWGNRK1313 will mount on the outside of each frame rail. See diagram to the right and video…

view full answer...

Answer 7

The side plates of the B&W gooseneck trailer hitch #BWGNRK1313 will mount on the outside of each frame rail of your 2004 Dodge 2500 8-foot bed. See the B&W video I included at the 7 min and 30 second mark. If your Firestone air bags like…

view full answer...

Brake Controller and Wiring Harness Recommendations for a 2019 Chevy Silverado 1500 LD

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching