Can The TireMinder TPMS Monitor Be Used With Jeep OEM TPMS Sensors

Question

Question:

can the Tire Minder sensors only read the cap sensors or is there one than can read OEM installed sensors like in a Jeep wrangler used as a tow vehicle, if not are there any issues with interference from the TM sensors with Jeep OEM sensors?

asked by: Ron A

0

Expert Reply:

Unless the OEM sensors were made by Tireminder they'll most likely communicate with their monitor using a different frequency and not be able to communicate with the monitor included in the TireMinder A1AS TPMS for RVs and Trailers w/ Signal Booster # TM79FR. If they are at different frequencies then you wouldn't have any interference issues either.

expert reply by: Kevin C

0

Answer 1

What you would want is the TireMinder A1AS TPMS for RVs and Trailers w/ Signal Booster #TM79FR plus a pair of additional sensors part #TM-2Brass since you have a need for a total of 12 sensors. This kit has a smartphone display like you want and also…

view full answer...

Answer 2

We have two really great options for monitoring 10 motorhome and trailer tire pressures with the part #TM56FR which comes with its own monitor or the #TM79FR which syncs to your smart phone and displays the pressures of all tires on your phone screen…

view full answer...

Answer 3

The TireMinders are indeed going to be a significant upgrade over your current tire pressure monitoring system, but they are not going to be compatible with an OEM or other tire pre-existing monitoring systems so you will need to replace your system…

view full answer...

Answer 4

You sure can! You are looking for the TireMinder Internal Transmitter #TM36FR which will work with your TireMinder TMPS System. This transmitter has a battery with a 5-year life, and nickel plated finish to help it resist corrosion over time.

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

Hi Tony, thanks for writing in and yes, we can 100% get your 2023 Jeep Wrangler set up to be flat towed behind your Holiday Rambler motorhome. To make it easy to order I'll go ahead and list everything out for you. - Base Plate Kit: Roadmaster…

view full answer...

Answer 7

A pressure relief valve is necessary for the Fogatti RV Tankless Water Heater - Gas - Automatic Pilot - 41,800 Btu - Black, part #LSB44FR, per the instructions and in accordance with ANSI standards. It appears this tankless water heater only comes…

view full answer...

Answer 8

The distance between the lock pin and housing on the Bulldog Lifelong Trailer Coupler Lock #BD580403 is 1-5/8".

view full answer...

Answer 9

The Tuson Towable Tire Pressure Monitoring System part #335TPMS6WIVS contains sensors which will last around 5 years with normal use.

view full answer...

Answer 10

The TireMinder i10 TPMS for RVs and Trailers w/ Signal Booster #335TPMS6WIVS comes with 10 sensors and can be expanded with the sensor kit part #TM-2Brass and you'd have all 12 tires covered. This kit can be expanded up to 20 sensors as needed.

view full answer...

Answer 11

The strap length of the tire pressure sensor setup you mentioned would not fit the barrel of a 22.5 inch wheel but we do have a solution with the Tuson TPMS part #335TPMS6WIVS which basically replaces the valve stems and has a pressure range between…

view full answer...

Answer 12

Yes, you can swap out your cap sensors for internal sensors and they will work with your current TST-507-RV-4 system. We offer the internal sensors individually with part #TST-507-INT-S1. Definitely a good idea if you don't want to have to worry…

view full answer...