Recommended Replacement RV Roof Vent Lid For A Fan-Tastic Vent RV Roof Vent

Question

Question:

Is the Replacement Dome for Fan-Tastic Vent RV Roof Vents - Tinted Item # FVK1020-19 a replacement for my Airstream 2023 Flying Cloud 25foot FBQ? The black clips on the new lid cracked. Is there an option other than the black plastic clips, as these break easily. Thank you,

asked by: Ronnie B

0

Expert Reply:

I confirmed with Dometic in the past that they only carry two styles of lids for the Fan-Tastic Vent line; flat or dome. From there you can then just choose your preferred color. If you have a Fan-Tastic Vent RV roof vent then you'll just need to determine if you had flat or dome styled lid to choose the correct replacement.

For a dome style you could use the Replacement Dome for Fan-Tastic Vent RV Roof Vents # FVK1020-19 you referenced or part # FVK1020-81 if you'd prefer white. If you had a flat lid you could use part # DMC66FR.

Unfortunately, most RV roof vent lids are typically a cheap plastic design that can easily be broken so I recommend getting a cover like the MaxxAir II RV and Trailer Roof Vent Cover # MA86JR (white # MA76JR) to install over your vent to protect the lid and allow you to use the vent during inclement weather or while driving. These covers will come with mounting brackets you can install on your vent and then easily clip the cover in place.

expert reply by: Kevin C

0

Answer 1

Since we don't have a confirmed fitting replacement for a 7300 I recommend taking a few measurements of your current cover's mounting hole locations and seeing it will match up to the Replacement Dome for Fan-Tastic Vent RV Roof Vents -…

view full answer...

Answer 2

Thank you for reaching out and providing your photos! The correct replacement lid for your Dometic FV1250 roof vent is the Replacement Flat Lid for Dometic Fan-Tastic Roof Vent - Smoke #DMC66FR which I confirmed with my contact at Dometic.

view full answer...

Answer 3

Since your vents are Fan-Tastic roof vents the correct vent cover in white is the part #FVU1500WH which also happens to be the only option as well. This will give you the protection for your vents you are wanting and will also allow them to open too…

view full answer...

Answer 4

The MaxxAir II RV and Trailer Roof Vent Cover w/ EZClip #MA76JR is universal enough that it can work with your Fan-Tastic RV roof vent. Fan-Tastic also makes a cover that would work great as well with the part #FVU1500BL. The MaxxAir cover would be…

view full answer...

Answer 5

The only way to operate the MaxxAir MaxxFan Trailer Roof Vent #MA00-04000K without rain getting inside is to also install the MaxxAir II Rain Cover #MA76JR. If you are wanting a single-piece unit that includes a rain cover and utilizes a thermostat…

view full answer...

Answer 6

While there are no direct replacements available for the discontinued American CS3000XL, you can absolutely replace it with the Progressive Dynamics RV Power Control Center with AC/DC Panel and Converter/Smart Charger #PD4135K. This is a 35 amp…

view full answer...

Answer 7

I attached a wiring diagram for the Progressive Dynamics Converter #PD4135K for you to check out. On the right side of the diagram you'll see the connections that run to the battery and on the left side you see the connections that you'd run…

view full answer...

Answer 8

Based on the picture you provided it looks you your hinge only has two points of contact. Since we do not have a 2-point hinge replacement I recommend using the Replacement Lid for Jensen, Ventline, Elixir, and Ventadome RV Roof Vents #A10-3375 as it…

view full answer...

Answer 9

The solution is to cover the fan with a Fan-Tastic Vent #FVU1500WH which will keep most rain out. Then relocate the sensor to near the vent opening so if it rained hard enough to blow into the vent cover THEN the rain sensor would close the fan…

view full answer...

Answer 10

Having Item #FVU1500WH on your vent is a great idea and I always recommend it when I do install videos on vents. You have also just pointed something out that I need to start making everyone aware of when I do the install videos so I thank you for…

view full answer...

Answer 11

The MaxxAir II RV and Trailer Roof Vent Cover w/ EZClip #MA76JR can be used with powered vents. The cover will prevent the vent lid from fully opening, but the manufacturer has stated in the past that the sensor in it will feel the pressure when the…

view full answer...

Answer 12

Yes, the Replacement Fan Motor Assembly Kit #FVK8017-00 is the correct motor replacement for your Fan-Tastic 4000BT roof vent.

view full answer...

Recommended Replacement RV Roof Vent Lid For A Fan-Tastic Vent RV Roof Vent

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching