Replacement Control Module For Kwikee 909511000

Question

Question:

The Kwikee step on our 35E Bounder motorhome has stopped working. I am finding part #s 909511000 revision 3. Code 5106 and part #903211000. Are these available? It is an electric step.

asked by: Ted B

0

Expert Reply:

The 903211000 means you have Kwikee Series 32 steps, and the 909511000 is the part number for the control module; I checked with Lippert (who makes Kwikee steps), and the correct replacement for that module is the following:

- Kwikee Step Control Step with Override Control Panel # LC381020

expert reply by: Kyle S

0

Answer 1

Since you need the Replacement Control Unit for Kwikee 38 Series Electric RV Steps #LC363989 I'm assuming you have 38 series steps on your 2017 Thor Windsport. The correct replacement motor for these steps would be the #LC379147.

view full answer...

Answer 2

You can use the RV Propane Gas Detector #RS64FR to replace your current Atwood 31013 propane gas detector. This will also use a 12v, 2-wire installation like your current detector.

view full answer...

Answer 3

The correct replacement for a Kwikee Step Motor 369545 is the Replacement Motor for Kwikee Electric RV Steps part #LC379147.

view full answer...

Answer 4

You're right, they do operate similarly, so the difference between controllers is the model of steps they work with. For example, part #LC379146 is for "pre-IMGL" step units that were manufactured from 1999 to 2005 while…

view full answer...

Answer 5

In order to test the motor on what I assume are set of Lippert Kwikee Electric Steps, you will first want to sever the yellow and red wires on the motor. Once you do this you will then need to obtain access to a 12 volt power source you know…

view full answer...

Answer 6

I reached out to my contact at Lippert and based on the numbers you found on your existing module the correct replacement for your Kwikee Step Assembly is the part #LC379146. This is an exact replacement and will hook right up for an easy…

view full answer...

Answer 7

There are indeed many different replacement step controllers out there and I am happy to re-confirm that the correct current item to replace your Kwikee step controller 1800709 is part #LC363989. I verified this item with my parts contacts at…

view full answer...

Answer 8

Tire manufacturers advise that trailer tires need to be filled to the max psi listed on the sidewall of the tire while cold. Your new tires should be inflated to the 110 psi when cold. That pressure will fluctuate as you use the tires and the…

view full answer...

Answer 9

Your Westlake ST235/85R16 Load Range G Trailer Tire #LHWL410 should always be inflated to its max 110 psi. Trailer tires like these should always be inflated to their max psi, regardless of your trailer's weight, to maintain its weight rating…

view full answer...