Is There a Minimum Number of Links for Blue Ox SwayPro Weight Distribution

Question

Question:

When installing a blue ox swaypro they recommend starting at the ninth link from the bar. What is the minimum number of links you can use?

asked by: Frank

0

Expert Reply:

There isn't a specified number for minimum links that can be used with the Blue Ox SwayPro part # BXW1000 that you referenced. As long as you are within the tongue weight range of the system (750-1,000) it will be close to around 9 links as that's average number that works.

expert reply by: Jameson C

0

Answer 1

The B&W Continuum Weight Distribution System part #BW78FR per B&W, does have built-in sway control. That said, all weight distribution systems have some sway control as they provide friction at the connection point which will then in turn…

view full answer...

Answer 2

I can certainly point you in the right direction here. I will stary by saying that after looking over pictures of the 2024 Airstream 30RB, I have concerns about the placement of the propane tanks on the tongue. In order to use the B&W Continuum…

view full answer...

Answer 3

When continuing to experience sway while using the Blue Ox SwayPro Weight Distribution w/ Sway Control - Clamp On - 10,000 lbs GTW, 1,000 lbs TW #BXW1000, I recommend making adjustments. I don't recommend starting with making changes to your…

view full answer...

Answer 4

If your Expedition and trailer both sit level with the Blue Ox SwayPro Weight Distribution System #BXW1000 installed, you shouldn't need to adjust anything on the chains or head to further limit sway, as the sway control is essentially built into…

view full answer...

Answer 5

I've attached the instructions on for the Blue Ox Sway Pro Weight Distribution System and there is a special note under number 4 on page for that I've attached as a photo for you. I found nothing in your owners manual about auto leveling…

view full answer...

Answer 6

The Blue Ox SwayPro part #BXW1000 would be your best option since your loaded tongue weight is 740 lbs. Going higher than that would be overkill and would give you a harsher ride quality.

view full answer...

Answer 7

WD systems are great at minimizing sway from passing semi trucks and high winds but they are not designed to prevent persistent sway like you described as that's almost always a loading problem. You need to get as much weight forward in the…

view full answer...

Answer 8

To be completely honest the sway control feature of the B and W Continuum part #BW78FR isn't nearly as advanced as the rest of the system. The advertised sway control of this system is in the head of the system between where the ball and the…

view full answer...

Answer 9

I looked up the weight of of your East to West 2900KBH and based on that and how well we know the B and W Continuum part #BW78FR works this would be a really great option that would do a much better job than the Fastway kit you have now at…

view full answer...

Answer 10

Since your 2023 Jayco travel trailer has an underslung coupler, you would want the B&W Continuum Weight Distribution System w/ Sway Control item #BW88FR. The Continuum item #BW78FR you were looking at is for standard couplers. It sounds like you…

view full answer...

Answer 11

An underslung trailer coupler is one that attaches to the bottom of the trailer frame and an overslung one is one that attaches to the top of the frame. The Replacement Head for Blue Ox SwayPro Weight Distribution Systems part #BXW4011 is for…

view full answer...

Answer 12

Yes, the B&W Continuum Weight Distribution System #BW78FR can be installed as easily on your angled driveway as it can be on level ground.

view full answer...

Is There a Minimum Number of Links for Blue Ox SwayPro Weight Distribution

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching