Hitch Recommendation For 2010 Jeep Patriot

Question

Question:

We decided to get a Kuat Beta bicycle rack. We do not have a hitch yet. Would you recommend getting a 2 inch receiver hitch or the smaller 1 1/4 one for this rack? From other Kuat reviews we hear that the 2 inch version of the rack gives a lot of wiggle roomin the 2-inch receiver although secured by hand-tightening cam so we are worried the rack would wobble.

asked by: Alena

0

Expert Reply:

The Kuat Beta Aluminum Folding 2 Bike Rack, part # B202-2, is designed for a 2 inch receiver, so I recommend a hitch that has a 2 inch receiver opening for your 2010 Jeep Patriot. I have attached a link to an article that describes how to choose a hitch-mounted bike carrier.

When considering a hitch mounted bike rack, you will want to make certain you have enough clearance for the bike carrier from the rear bumper or rear mounted spare tire. Normally, we suggest a hitch should be installed first and then measurements taken so that you can be certain of clearance from the rear bumper. You could also then consider the type bike you are planning on carrying, since bikes have so many different handlebar styles. I have attached a link to a helpful article that explains how to take the measurements for clearance.

I recommend the Draw-Tite Trailer Hitch, part # 75712. This has a 2 inch receiver and requires no drilling for installation. If your Patriot has the tow hook installed, it needs to be removed for installation, but can be re-installed after the hitch has been installed.

Another item I recommend is the Anti-Rattle Trailer Hitch Receiver Lock, part # 63232. This will not only reduce the rattle when using the bike carrier in the receiver, but also provides security by locking the carrier to the hitch receiver as well.

You will want to check your owners manual or with your dealership to make sure you do not exceed the vehicle maximum towing or tongue weight capacity.

Since you are installing a hitch on your Patriot, I have included some links to other items we carry that may prove to be useful for you.

expert reply by: Jeffrey L

0

Answer 1

You will need to look at the face of the lock on your RocketBox. There will be a number like A149. With that number I can tell you the correct replacement key. The control key, #Y8007835, is used to install or remove locks and will only work to do…

view full answer...

Answer 2

Kuat offers two different hitch locks, the #HL1 for the #B202-114 Beta that's designed for the 1-1/4 inch receiver and the #HL2 lock that's designed for the #B202-2 Beta rack that's designed for the 2 inch receiver. If the…

view full answer...

Answer 3

When using adapters, the play you are experiencing is a common problem. When using accessories in a trailer hitch, sometimes they are a perfect fit, sometimes they are a bit loose and other times they are so tight that you must file the accessory…

view full answer...

Answer 4

We do not sell just the internal block of the anti-rattle device part #63232 that you referenced so your best option would be to get a second one of these for use with your trailer ball that way you wouldn't have to mess with setting up the…

view full answer...

Answer 5

The Kuat Beta #B202-2 uses the wedge style of anti-rattle. When you turn the knob at the end of the rack the wedge pushes out to reduce or eliminate movement of the rack in the hitch. I have linked a video review of this rack for you. This…

view full answer...

Answer 6

The Anti-Rattle Hitch Lock for Kuat Transfer Bike Racks part #HLT comes with a 1/2" diameter bolt/pin. It can be used in both 1-1/4" receiver tubes with a 1/2" hitch pin hole and because it threads into the shank on the…

view full answer...

Answer 7

For your Kuat Beta bike rack #B202-2 the easiest solution to lock the bikes to the rack and to the hitch is to use a cable lock such as #e98891. Run the cable through the bikes and the safety chain loops on the trailer hitch to deter theft. I have…

view full answer...

Answer 8

I am sorry to hear about the issue's you're having with the Swagman Original Bike Rack #S64152-2. We have not heard anything from Swagman or from customers saying that the rack is not designed to secure 3 adult bikes. I did also reach…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 12

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Hitch Recommendation For 2010 Jeep Patriot

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching