Can B and W Companion Hitch Head From Ford Puck Hitch Fit Base for Turnoverball

Question

Question:

Hello, I have a question about the bandw companion base for goosneck to 5th wheel conversion. Currently I have a bandw that is set up for puck system on my 2017 gmc. I have since sold that and am purchasing a new truck with just a goosneck hookup. Will the head of my bandw come off and fit on the new base and also does it fit all trucks with goosneck ball?

asked by: Brent H

1

Helpful Expert Reply:

Yes, you can use the head of your current Companion hitch on the Replacement B and W Companion Base part # BWRVB3500 that you referenced. All of the Companion hitch heads are the same.

expert reply by: Jameson C

1

Answer 1

I have a solution but the gooseneck attachment point for the turnover ball systems isn't available for individual sale. You will need to purchase the Replacement Base for B&W Companion 5th Wheel Trailer Hitch - 20,000 lbs item #BWRVB3500 to…

view full answer...

Answer 2

Sounds like you are in need of replacement safety chain U-bolts for your B and W Turnoverball gooseneck hitch. For that we have them as part #BW1900-2-1600.

view full answer...

Answer 3

The RVK3000 is an older version of the B&W Companion hitch part #BWRVK3500 that you also mentioned. Both of these hitches were designed to fit the Turnoverball gooseneck hitches so yes, the RVK3000 would fit one too.

view full answer...

Answer 4

Yes, the B and W Companion base part #BWRVB3500 does work with all Turnoverball gooseneck hitches. This is just the base. For a complete hitch you'd need the part #BWRVK3500.

view full answer...

Answer 5

There is a B&W Companion fifth wheel hitch that will work if you have the factory fifth wheel/gooseneck prep package in your 2012 Ford F-250 or F-350 Super Duty, but it mounts in the puck system of your truck instead of using the gooseneck. If…

view full answer...

Answer 6

Thanks for the pictures! That is the B&W Companion 5th Wheel Trailer Hitch Base - 20,000 lbs item #BWRVB3500. In order for it to work with your 2022 Ram 2500 or 3500 Long Bed without the truck prep you will need the B&W Turnoverball Underbed…

view full answer...

Answer 7

Yes, the gooseneck hitch balls for the factory prep packages are the same for Ram and Ford. If you need a new hitch ball for either of these systems than you can use the Curt Pop-In Ball part #C60601 or the Reese Pop-In Ball part #RP19311.

view full answer...

Answer 8

I do have a solution, but since Lance has their own plug design there are no adapters that will work, including the #47595. The best option is to replace the lance plug with a standard 7-way blade connector like the #PK12706. This will eliminate the…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Answer 12

The head alone for the B&W Companion hitch #BWRVK3500 weighs about 70 pounds. Everything else weighs about 130 pounds. So the total weight of the hitch is approximately 200 pounds.

view full answer...

Can B and W Companion Hitch Head From Ford Puck Hitch Fit Base for Turnoverball

Product Page this Question was Asked From

Continue Researching