Recommended TorkLift Camper Tie-Downs For A 2008 Dodge Ram 2500 8' Bed

Question

Question:

I am trying to find the correct front and rear tie down brackets for my 2009 dodge 2500 diesel long bed. It’s not working to use the search function in this website. Let me know which numbers are correct please.

asked by: Bret

0

Expert Reply:

If your 2009 Dodge Ram 2500 with an 8' bed has no running boards or running boards that end with the cab then you'll need the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLD2101 and Rear # TLD3109.

If you have running boards that extend under the cab then you'll need the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLD4101 and Rear # TLD3109.

To complete your setup I also recommend picking up the TorkLift AnchorGuard Derringer Turnbuckles # TLS9020 as well.

expert reply by: Kevin C

0

Answer 1

For your 2008 Dodge Ram 3500 long bed with a Torklift Hitch part #TLD1102-30 the correct set of Torklift Camper Tie Downs are the #TLD2101 for the front and the part #TLR3503 for the rear. I attached an install video for these for you to check out as…

view full answer...

Answer 2

We have actually reached out to Roadmaster and verified that the Dual Hitch Receiver #RM-077-4 can indeed be used with a tow dolly. This has a total towing capacity of 10,000 ls and has a tongue weight rating of 400 lbs. So if you can verify that the…

view full answer...

Answer 3

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 4

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 5

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 6

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 7

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 10

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 11

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 12

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Recommended TorkLift Camper Tie-Downs For A 2008 Dodge Ram 2500 8' Bed

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching