Correct Roadmaster Exact Center Steering Stabilizer For 2022 Ford E450 Class C Motorhome

Question

Question:

I have a 2022 E450 class C Motorhome and would like a Roadmaster Exact Center Steering Stabilizer. What one is correct? Thanks

asked by: Andy

0

Expert Reply:

I checked directly with Roadmaster for you, and can verify the correct Exact Center stabilizer for your 2022 Ford E450 Class C motorhome is the following part number:

- Roadmaster Exact Center Steering Stabilizer # RM47MR

The Exact Center is a really nice choice as it will make it much easier to center your rig and give you a more relaxed driving experience.

expert reply by: Kyle S

0

Answer 1

For your 2022 Thor Outlaw 29J motorhome on a Ford E450 chassis, the correct steering stabilizer is the Roadmaster Exact Center Steering Stabilizer #RM47MR. I verified the fitment of the #RM47MR directly with Roadmaster for you, and it does come with…

view full answer...

Answer 2

I checked with Roadmaster, and the correct fit for your 2021 Ford E450 Class C RV is the Roadmaster Exact Center Steering Stabilizer #RM47MR.

view full answer...

Answer 3

The Roadmaster Exact Center Steering Stabilizer with Mounting Brackets #RM47MR is the correct steering stabilizer for your 2021 Entegra Odyssey 24B on the 2021 Ford E-450 chassis. This will replace the existing steering stabilizer and brackets that…

view full answer...

Answer 4

The Roadmaster Exact Center Steering Stabilizer w/ Custom Brackets #RM47MR typically comes centered and you would only need to make adjustments after installation and testing to see if it continues to pull. If you adjusted it all the way out to where…

view full answer...

Answer 5

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 6

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Answer 7

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 8

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 9

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 10

The best option we offer for your dump trailer is the Erickson Mesh Tarp and Truck Bed Cover part #EM57059 which measures 12' wide x 16' long. It's not the exact dimensions you wanted but it will still cover most of the area you need it…

view full answer...

Answer 11

A cover being installed on your spare tire would not prevent the Swagman Bike Rack part #S80501 from installing. The rack would still fit and work well. You might still compare the dimensions in the picture I attached with you spare tire so that you…

view full answer...

Answer 12

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...