What is Needed To Install Curt Spectrum Brake Controller On 2022 Kia Telluride With Factory 7-Way?

Question

Question:

Curt Spectrum Trailer Brake Controller. I have a KiA Telluride 2022 with a 7 pin factory installed do I need run wire to battery brake etc. or just use the factory 4 pin wire provided? anyway to get install instruction before I buy. all the Video I see have complete install without factory 7 pin.

asked by: Andy C

0

Expert Reply:

As long as your factory 7-way along with the corresponding fuses were all installed on your 2022 Kia Telluride you will simply need to connect the Wiring Adapter # C77BR to install the Curt Spectrum Trailer Brake Controller # C51170. I have linked an installation video below which discusses the controller and shows the installation process. If you run into issues you can check your owners manual to ensure all the correct fuses are in place.

expert reply by: Bud M

0

Answer 1

The location of the connector for connecting the Curt Wiring Adapter #C77BR on your 2023 Hyundai Santa Fe is under the dash to the left of the steering column. The 4-pin connector is cream colored and should be exposed. Be sure to look and feel…

view full answer...

Answer 2

Yes, Curt has confirmed that the Curt Trailer Hitch Receiver #C13427 is going to be a compatible fit for the 2024 Hyundai Palisade. For the wiring you'll need the Curt T-Connector Vehicle Wiring Harness #C43FV. This wire harness has easy…

view full answer...

Answer 3

Because it is only for a 2022 Hyundai Palisade that has the factory tow package, you do not need to route any wires whatsoever to add the Curt 7-way that fits, which is the following part number: - Curt T-Connector Vehicle Wiring Harness for…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 7

For your 2024 Hyunda Santa Cruz we have the Curt 7-way kit part #C68JR that is a confirmed fit. This installs by plugging into a factory wiring connector on your vehicle which means a really easy install that doesn't require any splicing.

view full answer...

Answer 8

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 9

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Answer 10

I do have a solution for your 2024 Kia Telluride that has the LED taillights that does allow it to have both a 4-way and 7-way plus install a brake controller but it is not with the #TK74CR which does not work for you based on the LED taillights.…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

The first thing you will need for your 1999 D250 is a 4-way. The Curt T-Connector Vehicle Wiring Harness #C55317 plugs into the connection points behind your rear bumper and will allow you to power your trailer's signal lights. Once the 4-way is…

view full answer...

What is Needed To Install Curt Spectrum Brake Controller On 2022 Kia Telluride With Factory 7-Way?

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching