Replacement Rubber Bumper for a Trailer

Question

Question:

my trailer has a bumper but is short than the one you sell my bumper start from left to rigth the first hole is 2 3/4 then 13 3/4 24 3/4 35 3/4 46 1/2 57 3/4 68 1/2 79 1/2 can your bumper fit on my trailer let me know and the price with shiping to yuma arizona the bumper is d3-96

asked by: Juan

0

Expert Reply:

The holes on your existing bumper seem to be about 11 inches apart. The holes on bumper # D3-96 are also 11 inches apart. You may have to drill a hole or two to get it lined up with the first hole but then it should line up nicely. I have also included a link to the right that will explain how to estimate shipping cost.

expert reply by: Michael H

0

Answer 1

The Pre-Drilled Round Rubber Trailer Bumper #D3-96 weighs 21lbs. It is 96" long, 3" wide and will stand 3" tall.

view full answer...

Answer 2

What you'd want to do is drill holes in the Pre-Drilled Round Rubber Trailer Bumper #D3-96 to match the mounting holes of your trailer and you'd be set. The bumper is rubber so it would be easy to drill. The pre drilled holes of this are 11…

view full answer...

Answer 3

All of our bumper strips are 96" long and have the holes pre-drilled out at 11" on center, but the nice thing is these can be cut and re-drilled to accommodate your application. You just need to choose which one has the width you're…

view full answer...

Answer 4

We have 3 different rubber bumpers that you can use for your horse trailer. They all measure 96" long but have different widths so you'll just need to choose the appropriate width: 2-1/16" Width - #D2-96 3" Width - #D3-96 4"…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

Hi Kat, The rubber bumpers that we offer are all 96" in length but can come in different widths. Based on the dimensions you provided i your pictures the #D3-96 is going to be the best fit, but you will have to cut it down to size.

view full answer...

Answer 7

The bumper part #D3-96 that you referenced is our best option and could work for you but you will need to make some modifications. You would need to cut it down to the 84 inch length you need and would also need to drill new holes in it that line up…

view full answer...

Replacement Rubber Bumper for a Trailer

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching