Availability Of Replacement Hub For Dico 45263
Question:
I have a 1995 Shorelandr boat trailer, model OMCB147F-OMCB167F, and want to replace the wheel bearings. The hubs that are currently on it are DICO 45263, 5 lugs on a Ø4.5inch circle. I am not able to remove the races from the hubs because there is not enough of the race exposed on the inside for a punch to catch on it. If I want to order new hub assemblies, which hub asm do I order? The spindles are straight Ø1-1/16inch with a Ø1-1/4inch seat for the grease seal. The pictures are of the grease seal, the bearing, and the hub.
asked by: Chuck B
Helpful Expert Reply:
Thanks for the picture!
If you can't get your races out, you'll just need the entire new hub assembly # AKIHUB-545-2-EZ-2K which comes with brand new races already installed, new bearings, and new grease seals but you'll need to use # 34823 which needs to be purchased separately to match the 1-1/4" grease seal surface you measured.
Products Referenced in This Question
Double Lip Grease Seal - ID 1.249" / OD 1.983" - Qty 1
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.249 Inch I.D.
- 1.983 Inch O.D.
- TruRyde
more information >
Easy Grease Trailer Idler Hub Assembly for 2K Axles - 10" to 12"- 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Easy Grease
- EZ Lube
- Pre-Greased
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- etrailer
more information >
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Shop: Single Axle Trailer Fender w/ Backing Plate - Steel - 13" to 14" Wheels - Qty 1
- Shop: Single Axle Trailer Fender w/ Backing Plate - Ribbed Steel - 13" to 14" Wheels - Qty 1
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 10" to 12"- 5 on 4-1/2 - Pre-Greased
- Shop: Double Lip Grease Seal - ID 1.249" / OD 1.983" - Qty 1
- Shop: Yates Endcap for Boat Trailer Rollers - Heavy-Duty Rubber - 1/2" Shaft - Qty 1
- Shop: Yates Endcap for Side Guide Rollers - Heavy-Duty Rubber - 1/2" Shaft - Qty 1
- Search Results: l67048
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 5 on 4-1/2 - Galvanized
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-545-2-G-EZ-2K Review
- Q&A: Looking for Hub to Replace Dico # 45263
- Q&A: Titan Replacement for Dico Trailer Idler Hub 17214
- Q&A: Replacement Hubs, Wheels, and Tires for a Boat Trailer That Uses Dico 45263 Hubs
- Q&A: New Hub Assembly For Trailer With Bearings L44549
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Video: Rhino-Rack Nautic Stack Kayak Carrier Review
- Q&A: What is Difference Between Trailer Bearings L44649 vs L44643
- Q&A: Replacement Bearings and Seals for a ShoreLandr Trailer with Dico 45263 Hubs