Does Auto-Leveling Affect Set Up Installing Fastway e2 Weight Distribution FA92-00-0600

Question

Question:

Im installing the fastway FA92-00-0600. My Jeep Grand Cherokee has a tow package that includes rear load leveling suspension. Does this affect the set up in any way?

asked by: Bill S

0

Expert Reply:

Per the installation instructions of the Fastway e2 Weight Distribution w/ 2-Point Sway Control - Trunnion - 6,000 lbs GTW, 600 lbs TW # FA92-00-0600, auto-leveling should be turned off when using the hitch, including for installation.

If for whatever reason you are unable to turn the auto-leveling off, what you'd want to do is first is connect your trailer, let the vehicle auto-level and then add the spring bar tension to your Fastway.

expert reply by: Kyle S

0

Answer 1

If you're not planning on loading the trailer until you get to a destination, you can either leave the trunion bars of your Fastway e2 #FA92-00-0600 completely off the system or loosen the bars up so that there isn't much tension. Either way…

view full answer...

Answer 2

Yes, you can simply order the Replacement Trunnion Spring Bars for Fastway e2 Weight Distribution Systems #FA92-01-1099 which are rated for 1,000 lbs of tongue weight and use them with your Fastway e2 Weight Distribution #FA92-00-0600. Doing this…

view full answer...

Answer 3

Based on the weight of the trailer you will be towing with your 2021 Toyota Highlander the correct Fastway E2 weight distribution system would be the part #FA92-00-0600 which has a tongue weight range of 250-600 lbs. The other systems would be rated…

view full answer...

Answer 4

The Fastway e2 Weight Distribution Hitch #FA92-00-0600 weighs 74 lbs. This system has a tongue weight capacity of 250 lbs - 600 lbs and uses spring bars which create friction within their brackets to help control trailer sway.

view full answer...

Answer 5

With a weight distribution system like the Fastway part # FA92-00-0600 you can back up as long as you back up mainly in a straight line. You want to avoid getting the trailer into too tight of a jackknife situation. Going forward you're totally…

view full answer...

Answer 6

Definitely! From the looks of your attached pictures, you definitely have a Fastway e2 weight distribution hitch that uses a trunnion spring bar like the #FA92-00-0600. I went ahead and reached out to my contact at Fastway, and he confirmed that the…

view full answer...

Answer 7

The weight of a weight distribution system does not get factored in as part of the tongue weight. Essentially the system becomes a part of the trailer hitch, which means the weight of it does not count as tongue weight either.

view full answer...

Answer 8

The ground clearance difference between Fastway round bar and trunnion bar weight distribution systems is about an inch at the head so it isn't much at all. And since you need to have it set up in the rise position you could go either way and…

view full answer...

Answer 9

The optional part is the coupler spacer block not the spring keeper. You will need to use the spring keeper on the Demco Composite eZ-Latch Replacement Repair Kit #DM6008. The spring keeper has two settings, -2.313, and -2.00, and depending on your…

view full answer...

Answer 10

Yes, you can remove your weld-on coupler and install a new bolt-on coupler that fits a 2 inch ball. There is just a few things you need to do to before and when installing. You need to know what channel size and the weight capacity you will need for…

view full answer...

Answer 11

The Equil-i-zer Weight Distribution with 4-Point Sway Control, like #EQ37041ET, differs from the Fastway e2 Weight Distribution with 2-Point Sway Control #FA92-00-0450, because it does utilize 2 more points of steel-on-steel friction at the head of…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Does Auto-Leveling Affect Set Up Installing Fastway e2 Weight Distribution FA92-00-0600

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching